30

All Intersil U.S. products are manufactured, assembled and tested utilizing ISO9000 quality systems.

Intersil Corporation’s quality certifications can be viewed at www.intersil.com/design/quality

Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design, software and/or specifications at any time without

notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate and

reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result

from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries.

For information regarding Intersil Corporation and its products, see www.intersil.com

Operating and Handling Considerations

Handling

All inputs and outputs of Intersil CMOS devices have a net-

work for electrostatic protection during handling.

Operating

Operating Voltage

During operation near the maximum supply voltage limit,

care should be taken to avoid or suppress power supply

turn-on and turn-off transients, power supply ripple, or

Input Signals

To prevent damage to the input protection circuit, input sig-

Input currents must not exceed 10mA even when the power

supply is off.

Unused Inputs

A connection must be provided at every input terminal. All

Output Short Circuits

devices by exceeding the maximum device dissipation.

CDP1805AC, CDP1806AC