AN3342 datasheet(31/39 Pages) STMICROELECTRONICS

Part #	AN3342

Description	Getting started with STM8TL5xxx

PDF	39 Pages

Scroll/Zoom	100%

Manufacturer	STMICROELECTRONICS [STMicroelectronics]

Direct Link	http://www.st.com

Logo

31 / 39 page

AN3342

Setting up the STM8 development environment

Doc ID 18461 Rev 3

31/39

11.3.2

Selecting the correct debug instrument

STM8TL53 Touch keypad evaluation board in standalone

In the example below, the ST-Link tool is used for communicating via the SWIM interface

with the on-board debug module of the STM8.

The ST-Link tool can be selected from the ‘Debug Instrument Selection’ list in the ‘Debug

Instrument Settings’ dialog (see Figure 18).

Figure 18.

STVD: Selecting the debug instrument

Note:

The Rlink can also be used for communicating via the SWIM interface.

STM8TL53 Touch keypad evaluation board with the STMT-BOX™ Display

board

The Display board embeds a built-in ST-Link V2 debug tool. If the evaluation board is

connected directly or through an isolation board to the Display board, the SWIM ST-Link

debug tool must be selected in the ‘Debug Instrument Settings’ window.

AN3342 Datasheet(PDF) 31 Page - STMicroelectronics