| Electronic Components Datasheet Search |
|
MAX3752CCM Datasheet(PDF) 8 Page - Maxim Integrated Products |
|
|
|||||||||||||||||||||||||||||
MAX3752CCM Datasheet(HTML) 8 Page - Maxim Integrated Products |
|
8 / 13 page ![]() 2.125Gbps, 3.3V Quad-Port Bypass with Repeater 8 _______________________________________________________________________________________ Applications Information The MAX3752 quad-port bypass circuit is designed for hard disk array applications of the Fibre Channel Arbitrated Loop network protocol. A drive array is a collection of hard disk drives (called physical drives) that are connected together. The total storage capacity of the array of physical drives can be divided into one or more subsets (called logical drives) that may be spread over all of the physical drives in the array. For example, a computer accessing the drive array might “see” it as two logical drives (D: and E:, for example) that each have a storage capacity of 20GB, even though the actual array is made up of eight physi- cal 5GB drives. In applications where data storage reliability is critical, it may be desirable to create a disk array where the data is stored redundantly on more than one physical drive. This type of system is generally called a redun- dant array of inexpensive disks (RAIDs). If a physical drive fails, it may be replaced and the lost data can be restored. Drive arrays are also useful in applications that require fast access to stored data. The data may be distributed over physical drives connected in a parallel arrange- ment, enabling access to data concurrently from multiple drives in the array. This makes it possible to achieve I/O rates much greater than what is feasible with nonarrayed drives. The Fibre Channel Arbitrated Loop protocol enables multiple physical drives to be connected in a loop topology. Each physical drive is connected to the Fibre Channel loop through an L-Port that may be individually addressed and controlled to create the array of logical drives. Data is transmitted over the loop as an encoded serial bit stream. Using the Fibre Channel Arbitrated Loop protocol, the configuration of the disk array can be rearranged under software control to achieve desired objectives (such as data reliability or fast access). The port bypass circuit allows any L-Port to be enabled (connected to the network) or bypassed (disconnected from the network) while the network is operating. This enables hot swapping of physical drives (inserting or removing physical drives while the network is operat- ing) so that drives may be replaced with minimal dis- ruption to the disk array system. Figure 2 shows the disk array. Input/Output Structures Figures 3 and 4 show models for the MAX3752 inputs and outputs. MUX 0 1 DISK DRIVE L-PORT IN OUT SEL PORT BYPASS MUX 0 1 DISK DRIVE L-PORT IN OUT SEL PORT BYPASS MUX 0 1 BYPASSED PORT BYPASS MUX 0 1 DISK DRIVE L-PORT IN OUT SEL PORT BYPASS SERIAL DATA IN SERIAL DATA OUT Figure 2. Disk Array Implemented with Port Bypass Circuits |
|
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |