MT90221AL datasheet(2/114 Pages) MITEL

2 / 114 page

MT90221

Applications

•

Cost effective single chip solution to implement

IMA and UNI links over T1 or E1 in all public or

private UNI, NNI and B-ICI applications

•

ATM Edge switch IMA and UNI Line Card

Design

•

Can be used for cost reduction in current

applications based on FPGA implementation

Description

The

MT90221

device

targeted

systems

implementing the ATM FORUM UNI speciﬁcations for

T1/E1 rates or Inverse Multiplexing for ATM (IMA). In

the MT90221 architecture, up to 4 physical and

independent T1/E1 streams can be terminated

through the utilization of off-the-shelf, traditional T1/

E1 framers and LIUs. This allows ATM designers to

leverage

T1/E1

design

experience,

hardware and software implementation, and to select

the best T1/E1 framer for the required application.

The

MT90221

device

provides

ATM

system

designers

with

ﬂexible

architecture

when

implementing

ATM

access

over

existing

and

deployed trunk interfaces, allowing a migration

towards ATM service technology. In addition to

allowing for the design of ATM UNI speciﬁcations for

T1/E1 rates, the MT90221 device is compliant with

the ATM FORUM IMA speciﬁcations for controlling

IMA groups of up to 4 trunks in a single chip. The

MT90221 can be conﬁgured to operate in different

modes to facilitate the implementation of the IMA

function at both CPE and Central Ofﬁce sites. For

systems targeting ATM over T1/E1 with IMA and UNI

operating

simultaneously,

the

MT90221

device

provides the ideal architecture and capabilities.

The device provides up to 4 internal IMA circuits and

allows for bandwidth scaleability through the use of

the UTOPIA MPHY, Level 2 speciﬁcation at 25Mhz.

The implementation of the IMA as per AF-PHY-

0086.001

Inverse

Multiplexing

for

ATM

(IMA)

Speciﬁcation Version 1.1 is divided into hardware

and software functions. Hardware functions are

implemented in the MT90221 device and software

functions are implemented by the user. Additional

hardware functions are included to assist in the

collection of statistical information to support MIB

implementation.

Hardware functions that are implemented in the

MT90221 device are:

•

Utopia Level 2 PHY Interface

•

Incoming HEC veriﬁcation and correction

(optional),

•

Generation of a new HEC byte

•

Format outgoing bytes into multi-vendor PCM

formats

•

Retrieve ATM Cells from the incoming multi-

vendor PCM format

•

Perform cell delineation

•

Provide various counters to assist in

performance monitoring

Hardware functions that are implemented by the IMA

processor in the MT90221 device are:

•

Transmit scheduler (one per IMA group)

•

Generation of the TX IMA Data Cell Rate

•

Generation and insertion of ICP cells, Filler

Cells and Stuff Cells in IMA mode and Idle Cells

in UNI (non-IMA) mode; the ICP cells are

programmed by the user and the Filler and Idle

cells are pre-deﬁned

•

Retrieve and process ICP cells in IMA Mode

•

Perform IMA Frame synchronization

•

Management of RX links to be part of the

internal re-sequencer when active

•

Extraction of RX IMA Data Cell Rate

•

Veriﬁcation of delays between links

•

Perform re-sequencing of ATM cells using

external asynchronous Static RAM

•

Can accommodate more than 400 msec of link

differential delay depending on the amount of

external memory

•

Provide structured Interrupt scheme to report

various events.

MT90221AL Datasheet(PDF) 2 Page - Mitel Networks Corporation

MT90221AL Datasheet(HTML) 2 Page - Mitel Networks Corporation

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL