| Electronic Components Datasheet Search |
|
CAP1126 Datasheet(PDF) 44 Page - Microchip Technology |
|
|
|||||||||||||||||||||||||||||
CAP1126 Datasheet(HTML) 44 Page - Microchip Technology |
|
44 / 73 page ![]() CAP1126 DS00001623B-page 44 2015 Microchip Technology Inc. Bits 2 - 0 - CAL_CFG[2:0] - Determines the update time and number of samples of the automatic re-calibration routine. The settings apply to all sensor inputs universally (though individual sensor inputs can be configured to support re-cal- ibration - see Section 6.11). Note 6-1 Recalibration Samples refers to the number of samples that are measured and averaged before the Base Count is updated however does not control the base count update period. Note 6-2 Update Time refers to the amount of time (in polling cycle periods) that elapses before the Base Count is updated. The time will depend upon the number of channels active, the averaging setting, and the programmed cycle time. 6.18 Sensor Input Threshold Registers The Sensor Input Threshold registers store the delta threshold that is used to determine if a touch has been detected. When a touch occurs, the input signal of the corresponding sensor pad changes due to the capacitance associated with a touch. If the sensor input change exceeds the threshold settings, a touch is detected. When the BUT_LD_TH bit is set (see Section 6.17 - bit 7), writing data to the Sensor Input 1 Threshold register will update all of the sensor input threshold registers (31h - 35h inclusive). 6.19 Sensor Input Noise Threshold Register TABLE 6-31: CAL_CFG BIT DECODE CAL_CFG[2:0] Recalibration Samples (see Note 6-1) Update Time (see Note 6-2) 21 0 0 0 0 16 16 00 1 32 32 0 1 0 64 64 (default) 0 1 1 128 128 10 0 256 256 1 0 1 256 1024 1 1 0 256 2048 1 1 1 256 4096 TABLE 6-32: SENSOR INPUT THRESHOLD REGISTERS ADDR R/W Register B7 B6 B5 B4 B3 B2 B1 B0 Default 30h R/W Sensor Input 1 Threshold -64 32 16 8 4 2 1 40h 31h R/W Sensor Input 2 Threshold -64 32 16 8 4 2 1 40h 32h R/W Sensor Input 3 Threshold -64 32 16 8 4 2 1 40h 33h R/W Sensor Input 4 Threshold -64 32 16 8 4 2 1 40h 34h R/W Sensor Input 5 Threshold -64 32 16 8 4 2 1 40h 35h R/W Sensor Input 6 Threshold -64 32 16 8 4 2 1 40h TABLE 6-33: SENSOR INPUT NOISE THRESHOLD REGISTER ADDR R/W Register B7 B6 B5B4 B3B2 B1B0 Default 38h R/W Sensor Input Noise Threshold CS_BN_TH [1:0] 01h |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |