TLE6263 datasheet(10/40 Pages) INFINEON

Part #	TLE6263

Description	LS CAN, LDO and HS Switch

PDF	40 Pages

Scroll/Zoom	100%

Manufacturer	INFINEON [Infineon Technologies AG]

Direct Link	http://www.infineon.com

Logo

10 / 40 page

Final Datasheet TLE 6263

Version 2.08

2004-06-07

Figure 4:

CAN Network Example

Receive-only Mode

The receive only mode is designed for a special test procedure to check the bus

connections. Figure 5 shows a network consisting of 5 nodes. If the connection between

node 1 and node 3 shall be tested, the nodes 2,4 and 5 are switched into receive only

mode. Node 1 and node 3 are in normal mode. If node 1 sends a message, node 3 is the

only node which can acknowledge the message, the other nodes can only listen but

cannot send an acknowledge bit. If node 1 receives the acknowledge bit from node 3,

the connection is OK.

Figure 5:

Testing the Bus Connection in Receive-only Mode

Controller 1

RxD1

BUS Line

Transceiver1

TxD1

Controller 2

RxD2

Transceiver2

TxD2

TLE6263 Datasheet(PDF) 10 Page - Infineon Technologies AG