0

50

100

150

200

250

300

350

0

50

100

150

200

Case Temperature (

C004

V

V

ISO7310C, ISO7310FC

SLLSEI8D – JUNE 2014 – REVISED APRIL 2015

www.ti.com

8.3.1.4 Safety Limiting Values

Safety limiting intends to prevent potential damage to the isolation barrier upon failure of input or output circuitry. A failure of

the I/O can allow low resistance to ground or the supply and, without current limiting, dissipate sufficient power to overheat

the die and damage the isolation barrier, potentially leading to secondary system failures.

PARAMETER

TEST CONDITIONS

MIN

TYP

MAX

UNIT

190

Safety input, output, or supply

mA

current

290

Maximum case temperature

150

°C

The safety-limiting constraint is the absolute-maximum junction temperature specified in the Absolut Maximun

Ratings table. The power dissipation and junction-to-air thermal impedance of the device installed in the

application hardware determines the junction temperature. The assumed junction-to-air thermal resistance in the

Thermal Information table is that of a device installed on a High-K Test Board for Leaded Surface-Mount

Packages. The power is the recommended maximum input voltage times the current. The junction temperature is

then the ambient temperature plus the power times the junction-to-air thermal resistance.

Figure 13.

14

Submit Documentation Feedback

Copyright © 2014–2015, Texas Instruments Incorporated

Product Folder Links: ISO7310C ISO7310FC