| Electronic Components Datasheet Search |
|
LAN8700i Datasheet(PDF) 35 Page - Microchip Technology |
|
|
|||||||||||||||||||||||||||||
LAN8700i Datasheet(HTML) 35 Page - Microchip Technology |
|
35 / 74 page ![]() 2007-2016 Microchip Technology Inc. DS00002260A-page 35 LAN8700/LAN8700i TABLE 5-30: REGISTER 0 - BASIC CONTROL Address Name Description Mode Default 0.15 Reset 1 = software reset. Bit is self-clearing. For best results, when setting this bit do not set other bits in this register. The configuration (as described in Section 5.4.9.2) is set from the register bit values, and not from the mode pins. RW/ SC 0 0.14 Loopback 1 = loopback mode, 0 = normal operation RW 0 0.13 Speed Select 1 = 100Mbps, 0 = 10Mbps. Ignored if Auto Negotiation is enabled (0.12 = 1). RW Set by MODE[2:0] bus 0.12 Auto-Negotiation Enable 1 = enable auto-negotiate process (overrides 0.13 and 0.8) 0 = disable auto-negotiate process RW Set by MODE[2:0] bus 0.11 Power Down 1 = General power down mode, 0 = normal operation RW 0 0.10 Isolate 1 = electrical isolation of PHY from MII 0 = normal operation RW 0 0.9 Restart Auto- Negotiate 1 = restart auto-negotiate process 0 = normal operation. Bit is self-clearing. RW/ SC 0 0.8 Duplex Mode 1 = Full duplex, 0 = Half duplex. Ignored if Auto Negotiation is enabled (0.12 = 1). RW Set by MODE[2:0] bus 0.7 Collision Test 1 = enable COL test, 0 = disable COL test RW 0 0.6:0 Reserved RO 0 TABLE 5-31: REGISTER 1 - BASIC STATUS Address Name Description Mode Default 1.15 100Base-T4 1 = T4 able, 0 = no T4 ability RO 0 1.14 100Base-TX Full Duplex 1 = TX with full duplex, 0 = no TX full duplex ability RO 1 1.13 100Base-TX Half Duplex 1 = TX with half duplex, 0 = no TX half duplex ability RO 1 1.12 10Base-T Full Duplex 1 = 10Mbps with full duplex 0 = no 10Mbps with full duplex ability RO 1 1.11 10Base-T Half Duplex 1 = 10Mbps with half duplex 0 = no 10Mbps with half duplex ability RO 1 1.10:6 Reserved 1.5 Auto-Negotiate Complete 1 = auto-negotiate process completed 0 = auto-negotiate process not completed RO 0 1.4 Remote Fault 1 = remote fault condition detected 0 = no remote fault RO/ LH 0 1.3 Auto-Negotiate Ability 1 = able to perform auto-negotiation function 0 = unable to perform auto-negotiation function RO 1 1.2 Link Status 1 = link is up, 0 = link is down RO/ LL X 1.1 Jabber Detect 1 = jabber condition detected 0 = no jabber condition detected RO/ LH X 1.0 Extended Capabilities 1 = supports extended capabilities registers 0 = does not support extended capabilities registers RO 1 |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |