Dual Output LEDs

The output LEDs provide a visible indication when the associated output is active (conducting).

•

1 represents the Channel 1 output

•

2 represents the Channel 2 output

Operating Instructions

Remote Input

For more information about how to perform TEACH/SET methods and to program the sensor remotely, see

www.bannerengineering.com and search 193602.

Run Mode

Run mode allows the sensor to operate normally and prevents unintentional programming changes. The +/SET/- rocker button is

disabled during RUN mode, except when using Window SET.

Program Mode

Program (PRG) mode allows the following settings to be programmed in the DF-G2.

4

www.bannerengineering.com - Tel: + 1 888 373 6767

P/N 193601 Rev. B