Quick Start Guide

Advanced Sensor with Dual Discrete Outputs and IO-Link Communication for Use with Plastic and Glass Fiber Optic Assemblies

To view or download the latest technical information about this product, including specifications, dimensions, accessories, and

wiring, see

www.bannerengineering.com.

WARNING: Not To Be Used for Personnel Protection

Never use this device as a sensing device for personnel protection. Doing so could lead to serious injury or

death. This device does not include the self-checking redundant circuitry necessary to allow its use in

personnel safety applications. A sensor failure or malfunction can cause either an energized or de-energized

sensor output condition.

Overview

Figure 1. DF-G2 IO Link Model Features

1. Output LED

2. CH1/CH2 Switch

3. RUN/PRG/ADJ Mode Switch

4. Lever Action Fiber Clamp

5. Red Signal Level

6. Green Threshold

7. +/SET/- Rocker Button

Models

Model

Sensing Beam Color

Reference Sensing Range1

Channel 1

Channel 2

Connector2

DF-G2-KD-2M

Visible Red

1100 mm

IO-Link, push/pull

output

PNP only output, or

input

2 m (6.5 ft) cable, 4-wire

DF-G2IR-KD-2M

Infrared

2100 mm

Installation Instructions

Mounting Instructions

Mount on a DIN Rail

1. Hook the DIN rail clip on the bottom of the DF-G2 over

the edge of the DIN rail (1).

2. Push the DF-G2 up on the DIN rail (1).

3. Pivot the DF-G2 onto the DIN rail, pressing until it snaps

into place (2).

1 Excess gain = 1, Long Range response speed, opposed mode sensing. PIT46U plastic fiber used for visible LED models, IT.83.3ST5M6 glass fiber used for

IR model

2 Connector options:

•

A model with a QD connector requires a mating cordset

•

For 150 mm (6 in) PVC, M8 Pico QD connector, 4-pin change the suffix 2M to Q3 in the 2 m model number (example, DF-G2-KD-Q3)

•

For 150 mm (6 in) PVC, M12 Euro QD connector, 4-pin change the suffix 2M to Q5 in the 2 m model number (example, DF-G2-KD-Q5)

•

For integral M8 Pico QD connector, 4-pin change the suffix 2M to Q7 in the 2 m model number (example, DF-G2-KD-Q7)

Amplifier with IO Link

Original Document

193601 Rev. B

19 March 2019

193601