ADAV801ASTZ datasheet(17/56 Pages) AD

17 / 56 page

ADAV801

Rev. 0 | Page 17 of 56

le Rate

ecause

ital

ut reduces the oversampling ratio,

cted

o generate a separate 12.288 MHz

eat

Selecting a Samp

The output sample rate of the ADC is always ADC MCLK/256,

as shown in Figure 23. By default, the ADC modulator runs at

ADC MCLK/2. When the ADC MCLK exceeds 12.288 MHz,

the ADC modulator should be set to run at ADC MCLK/4. This

is achieved by setting the AMC (ADC Modulator Clock) bit in

the ADC Control Register 1. To compensate for the reduced

modulator clock speed, a different set of filters are used in the

decimator section ensuring that the sample rate remains

the same.

The AMC bit can also be used to boost the THD + N perform

ance of the ADC at the expense of dynamic range. The

improvement is typically 0.5 dB to 1.0 dB and works, b

selecting the lower modulator rate reduces the amount of dig

noise, improving THD + N, b

therefore reducing the dynamic range by a corresponding

amount.

For best performance of the ADC, avoid using similar

frequency clocks from separate sources in the ADAV801. For

example, running the ADC from a 12.288 MHz clock conne

to MCLKI and using the PLL t

clock for the DAC can reduce the performance of the ADC.

This is due to the interaction of the clocks, which generate b

frequencies that can affect the charge on the switch capacitors

of the analog inputs.

WAIT FOR SAMPLE

DECREASE GAIN BY 0.5dB

AND WAIT ATTACK TIME

IS SAMPLE

GREATER THAN ATTACK

THRESHOLD?

ABO

THRESHOLD?

IS A RECOVERY

MODE ENABLED?

SAMPLE

VE ATTACK

ARE ALL

SAMPLES BELOW

RECOVERY

THRESHOLD?

HAS GAIN BEEN

FULLY RESTORED?

YES

NORMAL RECOVERY

INCREASE GAIN BY 0.5dB

WAIT RECOVERY TIME

LIMITED RECOVERY

ATTACK MODE

IS SAMPLE

ABOVE ATTACK

THRESHOLD?

ARE ALL

SAMPLES BELOW

RECOVERY

THRESHOLD?

HAS GAIN BEEN

FULLY RESTORED?

IS GAINCNTR

AT MAXIMUM?

YES

INCREASE GAIN BY 0.5dB

INCREMENT

GAINCNTR

HAS RECOVERY

TIME BEEN

REACHED?

HAS RECOVERY

TIME BEEN

REACHED?

Figure 26. ALC Flow Diagram

ADAV801ASTZ Datasheet(PDF) 17 Page - Analog Devices

ADAV801ASTZ Datasheet(HTML) 17 Page - Analog Devices

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56

Datasheet Download

Link URL