T1024 datasheet(33/49 Pages) FREESCALE

Part #	T1024

Description	QorIQ T1024 Reference Design Board

PDF	49 Pages

Scroll/Zoom	100%

Manufacturer	FREESCALE [Freescale Semiconductor, Inc]

Direct Link	http://www.freescale.com

Logo

33 / 49 page

Table 2-11. POR configuration through switches

(continued)

Switch

Signal name

Pin name

Signal meaning

Setting

100: boot from VBANK4 with

RCW 0x135 for 2.5G SGMII

mode

See note1

SW3[8]

TEST_SEL_N

TEST_SEL_B

1. SW3[5:7] can be used to change the starting address for the memory banks. The NOR flash memory is divided into eight

memory banks with 16 MB size each. Eight different U-Boot images can be programmed into each memory bank. When

NOR flash is selected as boot flash, different U-Boot images can be selected to boot up the board, by setting SW3[5:7].

NOTE

For other DIP switch settings and definitions, see T1024 QorIQ

Integrated Multicore Communications Processor Data Sheet

Chapter 2 Architecture

QorIQ T1024 Reference Design Board User Guide, Rev. 0, 04/2015

Freescale Semiconductor, Inc.

T1024 Datasheet(PDF) 33 Page - Freescale Semiconductor, Inc