LTC2802 datasheet(6/32 Pages) AD

6 / 32 page

LTC2873

REV B

For more information www.analog.com

The l denotes the specifications which apply over the full operating

temperature range, otherwise specifications are at TA = 25°C. VCC = VL = 3.3V, TE485 = VL, LB = 0V unless otherwise noted. (Notes 2, 6)

SWITCHING CHARACTERISTICS

SYMBOL

PARAMETER

CONDITIONS

MIN

TYP

MAX

UNITS

tZLSR232, tZHSR232 Receiver Enable from Shutdown

Time (Note 7)

VDD = 7.0V, VEE = –6.3V, 485/232 = 0V,

RL = 1kΩ, CL = 150pF, SHDN ↑ (Figure 12)

µs

tLZSR232, tHZSR232 Receiver Disable Into Shutdown Time 485/232 = 0V, RL = 1kΩ, CL = 150pF

SHDN ↓ (Figure 12)

0.4

μs

Mode Change Characteristics

tRDY

VDD and VEE Supply Rise Time

(Time from Shutdown to RS485 Ready)

(Figure 13)

0.2

tDR232

Time from RS485 Mode to RS232 Mode

RS232 Driver Ready

(Figure 14)

0.2

µs

tR232

Time from RS485 Mode to RS232 Mode

RS232 Receiver Ready

(Figure 14)

0.8

µs

tDR485

Time from RS232 Mode to RS485

Mode RS485 Driver and Receiver Ready

(Figure 14)

250

Note 1: Stresses beyond those listed under Absolute Maximum Ratings

may cause permanent damage to the device. Exposure to any Absolute

Maximum Rating condition for extended periods may affect device

reliability and lifetime.

Note 2: All currents into device pins are positive; all currents out of device

pins are negative. All voltages are referenced to device ground unless

otherwise specified.

Note 3: Guaranteed by other measured parameters and not tested directly.

Note 4: Time from SHDN ↑ until VDD ≥ 5V and VEE ≤ –5V. External

components as shown in the Typical Application section.

Note 5: Guaranteed by design and not subject to production test.

Note 6:Testing was done with VDD and VEE back driven to valid supply

levels for functions that require these supplies, unless otherwise noted.

Note 7: If enabling from shutdown, where VDD and VEE supplies are

collapsed, allow the extra time it takes to generate valid VDD and VEE

supplies (tRDY).

LTC2802 Datasheet(PDF) 6 Page - Analog Devices

LTC2802 Datasheet(HTML) 6 Page - Analog Devices

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32

Datasheet Download

Link URL