| Electronic Components Datasheet Search |
|
MGC3030 Datasheet(PDF) 22 Page - Microchip Technology |
|
|
|||||||||||||||||||||||||||||
MGC3030 Datasheet(HTML) 22 Page - Microchip Technology |
|
22 / 46 page ![]() Figure 6-4. Brown-out Reset Timing MCLR BOR TMCLR TBOR Reset Sequence CPU Starts Fetching Code (TSYSDLY BOR voltage = 2.25V to 2.45V ) 6.2 Power Management Unit (PMU) 6.2.1 Basic Connection Requirements The device requires a nominal 3.3V supply voltage. The following pins need to be connected: • All VDD and VSS pins need connection to the supply voltage and decoupling capacitors • VCORECAP: The devices’ core and digital logic are designed to operate at a nominal 1.8V, which is provided by an on-chip regulator. The required core logic voltage is derived from VDD and is outputted on the VCORECAP pin. A low-ESR capacitor (such as tantalum or ceramic) must be connected to the VCORECAP pin. This helps to maintain the stability of the regulator. • AVDD: Analog voltage references for the ADC needs to be connected to the supply voltage and a decoupling capacitor • VANA: Analog supply for GestIC analog front end must be connected to the supply voltage Figure 6-5. Connections for VCORE Regulator VDD VCORECAP VSS CEFC (2,3 ) 3.3V (1) (10 uF typ) MGC3140 Functional Description © 2018-2022 Microchip Technology Inc. and its subsidiaries Advance Information Datasheet DS40002037C-page 22 |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |