- 77 -

All Data Subject To Change Without Notice

www.andersonpower.com

Cable Clamps for SBS® 75X with Integral Handle *

Rugged chemical resistant PBT/ PC plastic cable clamps securely hold cables to prevent accidental strain or pulls from

dislodging wire or contacts from the housing. Cable clamps are recommended for solder terminated wires.

Cable Size AWG or

mm² or

Description

(Inches O.D.) **

(mm O.D.) **

Part Numbers

Minimum Quantity

100

25

Large Wire Clamp Kit w/ Hardware

12 to 6 (0.39 to 0.60)

4 to 10 (9.9 to 15.2)

PSBS75XCLP1-BK

PSBS75XCLP1

Small Wire Clamp Kit w/ Hardware

12 to 6 (0.34 to 0.55)

4 to 10 (8.6 to 14.0)

PSBS75XCLP2-BK

PSBS75XCLP2

* Torque value 5 (in - lbs) / 0.56 (Nm).

Reducing Bushings

Use with contact part number 1339G2-BK or 1340G1-BK to allow a smaller wire to be used

with the connector. Electrical capability is derated with smaller wire.

Dimensions

Contact Barrel Size

Wire Size

- ID -

- Length -

AWG mm²

AWG

mm²

Part Numbers

inches

mm

inches mm

Minimum Quantity

3,000

1,000

100

6

13.3

8

8.4

-

5912-BK

5912

0.18

4.6

0.45

11.4

6

13.3

12 to 10 3.3 to 5.3

5910-BK

-

5910

0.14

3.6

0.47

11.9

6

13.3

16 to 14 1.3 to 2.1

5913-BK

-

5913

0.09

2.3

0.47

11.9

See drawings on website for further detail

ID

Length

Wire Entrance

SBS® TOOLING INFORMATION

Wire Size

Power / Ground Contacts

AWG

mm²

Power

Contact

Part

Number

Pnenumatic

Bench Tool

+ Die

+ Locator

Number of

Crimps

OR Hand

Tool

6

13.3

1339G2

1387G1

1388G6

1389G9

Single

1309G4

8

8.4

1339G5

10 to 12

5.3 to 3.3

1339G3

1388G7

6

13.3

1340G1

1388G6

1389G20

8

8.4

1340G2

10 to 12

5.3 to 3.3

1340G3

1388G7

Wire Size

SBS® 75X Auxiliary Contacts

AWG

mm²

Auxiliary Contact

Part Number

APP® Hand Tool w/

Integral Locator

OR

Mil Std. Hand

Tool*

M22520/1-01

OR Pneumatic

Tool*

Number of

Crimps

+

Locator for:

TM0001 &

TP0001

12 to 24

2.5 to 0.25

All Crimp Pins

PM1000G1

TM0001

TP0001

Single

TL0001

All Crimp Sockets

TL0002

SBS® 75X Auxiliary Contact Insertion Tool: PM1002G1

SBS® 75X Auxiliary Contact Extraction Tool: PM1003G1

SBS® 75X Auxiliary Contact Insertion Inspection Tool: PM1003GX

SBS® 75X Insertion Tool: 111038G3

* TP0001 and TM0001 tools require locators TL0001 for Pins and TL0002 for Sockets.

NOTE: See website for the most current information.

The auxiliary contacts used with wire sizes 16 to 24 AWG cannot be properly inserted without the insertion tool. Properly installed auxiliary contact of

all wire gauges cannot be removed from the hosing without the extraction tool. It is highly recommended that inspection tool be used to ensure the

auxiliary contacts are seated properly.

Clamp hardware requires

phillips or flat blade

screwdriver to assemble.

[ 55.5 ]

2.18

[ 36.4 ]

1.44

[ 45.9 ]

1.81

[ 21.8 ]

0.86

[ 48.3 ]

1.90

** The given wire O.D. information is an estimate.

Cable clamps should be evaluated for performance

with the actual wire to be used.

2021-0065 DS-SBS REV C7.1

Your Best Connection™

Anderson™ will use reasonable efforts to include accurate and up-to-date content in the data sheet. All product information contained in the data sheet including ordering information,

illustrations, specifications, and dimensions, are believed to be reliable as of the date of publishing, but is subject to change without notice. Anderson™ makes no warranty or representation as

to its accuracy. Content in the data sheet may contain technical inaccuracies, typographical errors and may be changed or updated without notice. Anderson™ may also make improvements

and/or changes to the products and/or to the programs described in the content at any time without notice. Current sales drawings and specifications are available upon request.

©2021 Anderson Power Products, Inc. All rights reserved. APP®, A®, Anderson Power Products®, SBS® and the APP Logo are registered trademarks of Anderson Power Products, Inc.

Anderson™ and Your Best Connection™ are trademarks of Anderson Power Products, Inc.