AMW136 datasheet(18/28 Pages) SILABS

18 / 28 page

Regulatory Certification

ADS-MWx36-102R • AMWx36 Datasheet

Page |13

June 26, 2019

7 Regulatory Certification

The AMWx36 module has been certified for operation in

various regulatory domains. This section outlines

certification information specific to the following

countries and regions:

 United States

 Canada

 Europe

 Australia

 New Zealand

 Japan

The certifications listed in this section are valid at the

time of publication. For up-to-date information refer to

Zentri documentation online at:

https://docs.zentri.com.

All AMWx36 test reports are available on the Zentri

website:

https://docs.zentri.com/zentri/docresources#amw036

Should you require regulatory certification for the

AMWx36 module in a country or region not listed, please

contact your local Zentri sales office or create a support

request

via

our

website

https://www.silabs.com/about-us/contact-us.

7.1 United States

The Zentri AMWx36 module has received Federal

Communications

Commission

(FCC)

CFR47

Telecommunications, Part 15 Sub-part C “Intentional

Radiators” modular approval in accordance with Part

15.212 Modular Transmitter approval. Modular approval

allows the end user to integrate the AMWx36 module

into a finished product without obtaining subsequent

and separate FCC approvals for intentional radiation,

provided no changes or modifications are made to the

module circuitry. Changes or modifications could void

the user’s authority to operate the equipment. The end

user must comply with all of the instructions provided by

the Grantee which indicate installation and/or operating

conditions necessary for compliance.

The finished product is required to comply with all

applicable FCC equipment authorization, regulations,

requirements, and equipment functions not associated

with the transmitter module portion. For example,

compliance must be demonstrated to regulations for

other transmitter components within the host product;

to requirements for unintentional radiators (Part 15 Sub-

part B “Unintentional Radiators”), such as digital devices,

computer peripherals, radio receivers, etc.; and to

additional

authorization

requirements

for

non-

transmitter functions on the transmitter module (i.e.

Verification, or Declaration of Conformity) (e.g.,

transmitter modules may also contain digital logic

functions) as appropriate.

7.1.1 Labeling and User Information

Requirements

The AMWx36 module has been labelled with a unique

FCC ID number, and if the FCC ID is not visible when the

module is installed inside another device, then the

outside of the finished product into which the module is

installed must also display a label referring to the

enclosed module. This exterior label can use wording as

follows:

Contains FCC ID: 2ABPY-B5BD9

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) this device may not cause harmful interference,

and (2) this device must accept any interference

received, including interference that may cause

undesired operation.

AMW136 Datasheet(PDF) 18 Page - Silicon Laboratories

AMW136 Datasheet(HTML) 18 Page - Silicon Laboratories

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28

Datasheet Download

Link URL