AMW136 datasheet(19/28 Pages) SILABS

19 / 28 page

Regulatory Certification

ADS-MWx36-102R • AMWx36 Datasheet

Page |14

June 26, 2019

The user manual for the product should include the

following statement:

Additional information on labeling and user information

requirements for Part 15 devices can be found in KDB

Publication 784748 available at the FCC Office of

Engineering and Technology (OET) Laboratory Division

Knowledge Database (KDB) at the following website:

http://www.fcc.gov

7.1.2 RF Exposure

All transmitters regulated by FCC must comply with RF

exposure requirements. OET Bulletin 65, Evaluating

Compliance with FCC Guidelines for Human Exposure to

Radio Frequency Electromagnetic Fields, provides

assistance in determining whether proposed or existing

transmitting facilities, operations or devices comply with

limits for human exposure to Radio Frequency (RF) fields

adopted by the Federal Communications Commission

(FCC). The bulletin offers guidelines and suggestions for

evaluating compliance.

If appropriate, compliance with exposure guidelines for

mobile and unlicensed devices can be accomplished by

the use of warning labels and by providing users with

information concerning minimum separation distances

from transmitting structures and proper installation of

antennas.

The following statement must be included as a CAUTION

statement in manuals and OEM products to alert users

of FCC RF exposure compliance:

If the AMWx36 module is used in a portable application

(i.e., the antenna is less than 20 cm from persons during

operation), the integrator is responsible for performing

Specific Absorption Rate (SAR) testing in accordance

with FCC rules 2.1091.

7.1.3 Further Information

Additional information regarding FCC certification and

use of the AMWx36 module in the United States is

available from the following sources.

 Federal Communications Commission (FCC)

http://www.fcc.gov

This equipment has been tested and found to com-

ply with the limits for a Class B digital device,

pursuant to part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against

harmful interference in a residential installation. This

equipment generates, uses and can radiate radio

frequency energy and if not installed and used in

accordance with the instructions, may cause harmful

interference to radio communications. However,

there is no guarantee that interference will not occur

in a particular installation. If this equipment does

cause harmful interference to radio or television

reception, which can be determined by turning the

equipment off and on, the user is encouraged to try

to correct the interference by one or more of the

following measures:

 Reorient or relocate the receiving antenna.

 Increase the separation between the

equipment and receiver.

 Connect the equipment into an outlet on a

circuit different from that to which the receiver

is connected.

 Consult the dealer or an experienced radio/TV

technician for help.

To satisfy FCC RF Exposure requirements for mobile

and base station transmission devices, a separation

distance of 20 cm or more should be maintained

between the antenna of this device and persons

during operation. To ensure compliance, operation

at closer than this distance is not recommended.

The antenna(s) used for this transmitter must not

be co-located or operating in conjunction with any

other antenna or transmitter

AMW136 Datasheet(PDF) 19 Page - Silicon Laboratories

AMW136 Datasheet(HTML) 19 Page - Silicon Laboratories

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28

Datasheet Download

Link URL