UPD17062 datasheet(172/298 Pages) RENESAS

172 / 298 page

170

µPD17062

Table 13-2

State of Each Pin During the Halt or Clock Stop State and Cautions to Be Taken (2/2)

INTNC

RED

GREEN

BLUE

BLANK

HSYNC

VSYNC

PWM3

PWM2

PWM1

PWM0

ADC0

XIN

XOUT

Clock stop state

State of each pin and cautions in processing

Halt state

Pin symbol

Pin function

If the pin is floating, external noise causes the current drain to increase.

The output pins remain in the state in

which they were when the HALT

instruction was executed. If the IDCEN

flag is set, the current drain increases.

It is necessary to take the same cautions

as for the general-purpose output port.

The pin becomes floating.

The current drain varies with the

waveform of the oscillation output of the

clock oscillator.

The larger the amplitude, the current drain

becomes lower.

The oscillation amplitude of the oscillator

varies depending on its crystal and load

capacitance; evaluation is required.

The IDC is disabled.

Each pin behaves as follows:

The current drain will not increase,

even if the RED, GREEN, and BLUE

pins output a low level, or the HSYNC

and VSYNC pins are floating.

All pins output a low level.

The XIN pin is internally pulled

down, and the XOUT pin outputs a

high level.

Interrupt

IDC

D/A converter

A/D converter

Clock oscillator

UPD17062 Datasheet(PDF) 172 Page - Renesas Technology Corp

UPD17062 Datasheet(HTML) 172 Page - Renesas Technology Corp

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL