UPD17708 datasheet(150/358 Pages) RENESAS

150 / 358 page

µPD17704, 17705, 17707, 17708, 17709

148

13. TIMERS

Timers are used to manage the program execution time.

13.1 Outline of Timers

Figure 13-1 outlines the timers.

The following five timers are available.

•

Basic timer 0

•

Timer 0

•

Timer 1

•

Timer 2

•

Timer 3

Basic timer 0 detects the status of a flip-flop that is set at fixed time intervals in software.

Timers 0 through 3 are modulo timers and can use interrupts.

Basic timer 0 can also be used to detect a power failure. Timer 3 is multiplexed with the D/A converter.

The clock of each timer is created by dividing the system clock (4.5 MHz).

Figure 13-1. Outline of Timers (1/2)

(1) Basic timer 0

(2) Timer 0

(3) Timer 1

Clock selection

4.5 MHz

BTM0CY flag

Flip-flop

Clock selection

4.5 MHz

Gate control

TM0G

Start/stop

8-bit counter

Interrupt control

Coincidence detection

Overflow

Modulo register

Clock selection

4.5 MHz

Start/stop

8-bit counter

Interrupt control

Coincidence detection

Modulo register

UPD17708 Datasheet(PDF) 150 Page - Renesas Technology Corp

UPD17708 Datasheet(HTML) 150 Page - Renesas Technology Corp

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL