NE5230, SA5230, SE5230

http://onsemi.com

2

MAXIMUM RATINGS

Rating

Symbol

Value

Unit

Single Supply Voltage

18

V

Dual Supply Voltage

±9

V

Input Voltage (Note 1)

±9 (18)

V

Differential Input Voltage (Note 1)

V

Common−Mode Voltage (Positive)

V

Common−Mode Voltage (Negative)

V

Power Dissipation (Note 2)

500

mW

Thermal Resistance, Junction−to−Ambient

N Package

D Package

130

182

°C/W

Operating Junction Temperature (Note 2)

150

°C

Operating Temperature Range

NE

SA

SE

0 to 70

−40 to 85

−40 to 125

°C

80 Output Short−Circuit Duration to Either Power Supply Pin (Notes 2 and 3)

Indefinite

s

Storage Temperature

−65 to 150

°C

Lead Soldering Temperature (10 sec max)

230

°C

Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the

Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect

device reliability.

2. The maximum operating junction temperature is 150°C. At elevated temperatures, devices must be derated according to the package thermal

resistance and device mounting conditions.

Derate above 25°C at the following rates:

N package at 7.7 mW/°C

D package at 5.5 mW/°C.

3. Momentary shorts to either supply are permitted in accordance to transient thermal impedance limitations determined by the package and

device mounting conditions.

RECOMMENDED OPERATING CONDITIONS

Characteristic

Value

Unit

Single Supply Voltage

1.8 to 15

V

Dual Supply Voltage

±0.9 to ±7.5

V

Common−Mode Voltage (Positive)

V

Common−Mode Voltage (Negative)

V

Temperature

NE Grade

SA Grade

SE Grade

0 to +70

−40 to +85

−40 to +125

°C