Electronic Components Datasheet Search
  English  ▼

X  

TDA8501 Datasheet(PDF) 7 Page - NXP Semiconductors

Part # TDA8501
Description  PAL/NTSC encoder
PDF  30 Pages
Scroll/Zoom Zoom In 100%  Zoom Out
Manufacturer  PHILIPS [NXP Semiconductors]
Direct Link  http://www.nxp.com
Logo PHILIPS - NXP Semiconductors

TDA8501 Datasheet(HTML) 7 Page - NXP Semiconductors

Back Button TDA8501 Datasheet HTML 3Page - NXP Semiconductors TDA8501 Datasheet HTML 4Page - NXP Semiconductors TDA8501 Datasheet HTML 5Page - NXP Semiconductors TDA8501 Datasheet HTML 6Page - NXP Semiconductors TDA8501 Datasheet HTML 7Page - NXP Semiconductors TDA8501 Datasheet HTML 8Page - NXP Semiconductors TDA8501 Datasheet HTML 9Page - NXP Semiconductors TDA8501 Datasheet HTML 10Page - NXP Semiconductors TDA8501 Datasheet HTML 11Page - NXP Semiconductors Next Button
Zoom Inzoom in Zoom Outzoom out
 7 / 30 page
background image
April 1993
7
Philips Semiconductors
Preliminary specification
PAL/NTSC encoder
TDA8501
Fig.3
Low pass filter response for colour
difference signals (PAL mode).
(1) frequency response.
(2) group delay.
Fig.4
Low pass filter response for colour
difference signals (NTSC mode).
(1) frequency response.
(2) group delay.
Low pass filters
The
−3dB nominal frequency response level of the low
pass filters are different in PAL and NTSC modes.
PAL mode: bandwidth = 1.35 MHz nominal (see Fig.3).
NTSC mode: bandwidth = 1.1 MHz nominal (see Fig.4).
The signal outputs of the low pass filters are connected to
the signal inputs of the U and V modulators.
U AND VMODULATORS
Two four-quadrant multipliers are used for quadrature
amplitude modulation of the U and V signals. The level of
harmonics produced by the modulated signals are
minimal, because of real multiplication with sinewave
carriers.
The unbalance of the modulators is minimized by means
of a control loop and two external capacitors, pin 6 for the
U modulator and pin 12 for the V modulator. The timing of
the control loop is triggered by the H/2 pulse, so that during
one sync period the U control is active and during the next
sync period the V control is active. In this way, when U and
V are both zero, the suppressed carrier is guaranteed to be
at a low level.
The internal oscillator circuit generates two sinewave
carriers (0 degree and 90 degree). The '0 degree' (0)
carrier is connected to the U modulator and the '90 degree'
(1) carrier is connected to the V modulator.
PAL mode:
• switched sequentially by the H/2 pulse, the V signal is
modulated alternately with the direct and inverse carrier.
• the internal H/2 pulse can be forced into a specific phase
by means of an external pulse connected to pin 4 (H/2).
Forcing is active at HIGH level. If not used pin 4 can be
left open-circuit or connected to ground. If pin 4 is left
open, the internally generated H/2 pulse (output) is
connected to this pin.
NTSC mode:
• alternation of the V modulation is not allowed. If pin 4 is
not used for set-up control (see Y +SYNC, CVBS and
Chrominance outputs), it can be left open-circuit or
connected to ground.



Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30


Datasheet Download

Go To PDF Page


Link URL



Does ALLDATASHEET help your business so far?  [ DONATE ] 

About Alldatasheet   |   Advertisement   |   Contact us   |   Privacy Policy   |   Link to Datasheet    |   Link Exchange   |   Manufacturer List
All Rights Reserved©Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com