PM5366-PI datasheet(240/267 Pages) PMC

240 / 267 page

PRELIMINARY

PM5366 TEMAP-84

DATASHEET

PMC-2010672

ISSUE 1

HIGH DENSITY 84/63 CHANNEL VT/TU MAPPER

AND M13 MULTIPLEXER

PROPRIETARY AND CONFIDENTIAL

228

5. Parameter tHAR is not applicable if address latching is used.

6. When a set-up time is specified between an input and a clock, the set-up

time is the time in nanoseconds from the 1.4 Volt point of the input to the 1.4

Volt point of the clock.

7. When a hold time is specified between an input and a clock, the hold time is

the time in nanoseconds from the 1.4 Volt point of the input to the 1.4 Volt

point of the clock.

Table 41

- Microprocessor Interface Write Access

Symbol

Parameter

Min

Max

Units

tSAW

Address to Valid Write Set-up Time

tSDW

Data to Valid Write Set-up Time

tSALW

Address to Latch Set-up Time

tHALW

Address to Latch Hold Time

tVL

Valid Latch Pulse Width

tSLW

Latch to Write Set-up

tHLW

Latch to Write Hold

tHDW

Data to Valid Write Hold Time

tHAW

Address to Valid Write Hold Time

tVWR

Valid Write Pulse Width

PM5366-PI Datasheet(PDF) 240 Page - PMC-Sierra, Inc

PM5366-PI Datasheet(HTML) 240 Page - PMC-Sierra, Inc

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL