LTM8065 datasheet(6/43 Pages) AD

6 / 43 page

Data Sheet

LTM8060F

analog.com

Rev. 0

6 of 43

(TA = 25°C, VINn = 12V, RUNn = 2V unless otherwise noted.1,2 )

PARAMETER

SYMBOL

CONDITIONS

COMMENTS MIN TYP MAX UNITS

SYNCn Threshold to

Enable Spread Spectrum

VEN(SYNC)

2.8

4.0

SYNCn Current

ISYNC

SYNCn = 6V

μA

TRSSn Source Current

ITRSS

TRSSn = 0V

μA

TRSSn Pull-Down

Resistance

RTRSS

Fault condition, TRSSn =

0.1V

200

The LTM8060FE is guaranteed to meet performance specifications from 0°C to 125°C internal. Specifications

over the full –40°C to 125°C internal operating temperature range are assured by design, characterization,

and correlation with statistical process controls. The LTM8060FI is guaranteed to meet specifications over

the full –40°C to 125°C internal operating temperature range. Note that the maximum internal temperature is

determined by specific operating conditions in conjunction with board layout, the rated package thermal

resistance and other environmental factors.

The n represents each individual channel. Four outputs are tested separately, and the same testing

condition is applied to each output.

The maximum current out of any channel may be limited by the internal temperature of the LTM8060F. For

different VIN, VOUT, and TA conditions, see the output current derating curves in the Applications

Information section.

LTM8065 Datasheet(PDF) 6 Page - Analog Devices