MP6005

– WIDE-INPUT, HIGH-EFFICIENCY FLYBACK AND FORWARD CONTROLLER

MP6005 Rev. 1.0

www.MonolithicPower.com

6

2/5/2021

MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.

© 2021 MPS. All Rights Reserved.

Parameter

Symbol

Condition

Min

Typ

Max

Units

GATE sink current (12)

VCC = 8.5V, GATE = 10nF,

test gate falling speed

1.7

A

GATE high voltage output

VGATE

VCC -

0.05

V

GATE low voltage output

VGATE

0.05

V

GATE minimum on time

tON-MIN

250

ns

GATE max duty cycle

DMAX

70

%

SYNC Signal

SYNC sourcing impedance

ISYNC

IGATE = -20mA

5

Ω

SYNC sinking impedance

ISYNC

IGATE = 20mA

2

Ω

SYNC source current (12)

VCC = 8.5V, SYNC = 10nF,

test SYNC rising speed

0.8

A

SYNC sink current (12)

VCC = 8.5V, SYNC = 10nF,

test SYNC falling speed

1.2

A

SYNC high voltage output

VSYNC

VCC -

0.05

V

SYNC low voltage output

VSYNC

0.05

V

Protections

Overload protection (OLP)

hiccup on time (12)

4.8

ms

OLP hiccup off time (12)

340

ms

Thermal shutdown

temperature (12)

TSD

150

°C

Thermal shutdown

hysteresis (12)

THYS

20

°C

Notes:

8) Guaranteed by over-temperature correlation, not tested in production.

9) A minimum output diode conduction time greater than 0.7µs is recommended.

10) RSENSE-GND is the resistance from the SENSE pin to GND, which includes the CS resistor from the MOSFET source to GND and the resistor

from the MOSFET source to the SENSE pin.

11) See Table 1 on page 15 and Table 2 on page 17 for voltage-level program options.

12) Guaranteed by sample characterization, not tested in production.