JMS583

Datasheet

Revision 1.0

ii

Document No.: PDS-17001

The information contained in this document is the exclusive property of JMicron Technology Corporation and shall not be used,

collected, reproduced, distributed and/or disclosed in whole or in part without prior written permission of JMicron Technology

Corporation.

Revision History

Revision

Number

Effective

Date

Description of Revision

Author

Reference

Description of the Change

0.1

11/9/2017

-

Draft release

Joe Chang

0.2

4/12/2018

Table 1

Table 9

Section 5.4

1. Modify the internal weak pull-high resistor (Max. 59k,

Typical 38k, Min. 27k).

2. Add XAVDDH signal description.

3. GPIO[4] is used as LED indicator by default.

Joe Chang

0.3

6/6/2018

Figure 2

Chapter 6

Chapter 7

1. Package outline drawing of QFN64 8x8

2. Update crystal electrical and reset voltage

3. Update electrical characteristics

Joe Chang

1.0

6/30/2018

Chapter 2

Table 13

1. Support SCSI / NVMe Pass-through command.

2. Change the typical value of 1.0V power supply.

Joe Chang