12

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

MAKING A CHAMFER

The V-groove in the front shoe allows

you to create a sloping edge along

the corner of your workpiece.

1. Make sure that the workpiece is

secured to a stable platform.

2. Align the V-groove in the front

shoe of the planer with the corner

edge of the workpiece.

• Be sure the blades are not

touching the workpiece.

• Place some weight on the

depth adjustment knob so that

the V-groove is absolutely flat

on the edge to be beveled.

3. Switch the tool ON and wait for

the blades to reach full speed.

4. Push the planer forward along the grain of the wood with steady pressure

on the front shoe.

• Push the planer beyond the edge of the workpiece without tilting it

downwards.

5. Turn off the planer and wait for the blade to stop before setting the tool

down.

MAKING A RABBETING CUT

The planer can create rabbet cuts up

to 8 mm, limited by the protruding

housing on the right-hand side of the

tool.

1. Make sure that the workpiece is

secured to a stable platform.

2. Follow instructions on page 11 to

perform your cut.

3. Make multiple progressive cuts to achieve the desired total cutting depth.