SFEC5 datasheet(20/40 Pages) CLARKE

20 / 40 page

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

APPLYING DETERGENTS

NOTE: Use only detergents designed for pressure washers; household detergents,

acids, alkaline, bleaches, solvents, flammable material or industrial grade

solutions can damage the pump. Many detergents may require mixing prior to

use. Prepare cleaning solutions as instructed on the solution bottle.

TO APPLY DETERGENTS

1. Press the detergent hose onto

the barbed detergent injector

fitting located on top of the high

pressure hose connection (Water

Outlet).

2. Remove the cap from the

detergent tank located at the

front of the washer.

3. Fill the tank with detergent of

choice, making sure you follow

the detergent instructions.

4. Place the other end of the

detergent hose, with filter, into

the detergent tank holding the

detergent or cleaning solution, making sure the filter is fully submerged.

5. Install the detergent (black)

nozzle on the end of the spray

gun.

NOTE: Detergents should not be

applied with any of the high

pressure nozzle tips (white,

green, yellow or red).

6. Make sure the garden hose is

connected to the water inlet.

Check that the high pressure

hose is connected to the spray gun and pump. Turn on the water supply and start

the engine.

SFEC5 Datasheet(PDF) 20 Page - Clarke International