GWH4 datasheet(19/48 Pages) CLARKE

19 / 48 page

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

PREPARING THE MACHINE FOR USE

LOOSE ITEMS SUPPLIED

When unpacking, any damage or deficiency should be reported to your CLARKE

dealer immediately.

• 1 x MB 25AK welding torch with hose (0.8mm tip fitted)

• 1 x Electrode holder/lead

• 1 x Earth cable/clamp

• 1 x Set U rollers U1.0/1.2mm (Aluminium welding)

• 2 x Hose clips

• 1 x Gas hose

• 1 x 1.0mm welding torch tip

• 1 x 1.2mm welding torch tip

• 1 x 1.0mm welding torch tip (aluminium wire)

• 1 x 1.2mm welding torch tip (aluminium wire)

• 1 x PTFE liner

• 1 x Gas cylinder retaining strap

• 2 x Castor wheels with fittings

• 1 x Baseplate

• 2 x Large wheels with axle and pins

FITTING THE GAS BOTTLE HOLDER AND WHEELS

1. Fit both wheels to the stub axles and

secure with the cotter pins supplied.

2. Attach the lower panel/gas bottle

support to the underside of the

machine using the four bolts

supplied.

GWH4 Datasheet(PDF) 19 Page - Clarke International