 |
Electronic Components Datasheet Search |
|
|
Electronic Components Datasheet Search |
|
ST72325 Datasheet(PDF) 43 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
ST72325 Datasheet(HTML) 43 Page - STMicroelectronics |
|
|
43 / 196 page  43/196 7.7 EXTERNAL INTERRUPT CONTROL REGISTER (EICR) Read/Write Reset Value: 0000 0000 (00h) Bit 7:6 = IS1[1:0] ei2 and ei3 sensitivity The interrupt sensitivity, defined using the IS1[1:0] bits, is applied to the following external interrupts: - ei2 (port B3..0) - ei3 (port B4) These 2 bits can be written only when I1 and I0 of the CC register are both set to 1 (level 3). Bit 5 = IPB Interrupt polarity for port B This bit is used to invert the sensitivity of the port B [3:0] external interrupts. It can be set and cleared by software only when I1 and I0 of the CC register are both set to 1 (level 3). 0: No sensitivity inversion 1: Sensitivity inversion Bit 4:3 = IS2[1:0] ei0 and ei1 sensitivity The interrupt sensitivity, defined using the IS2[1:0] bits, is applied to the following external interrupts: - ei0 (port A3) - ei1 (port F2..0) These 2 bits can be written only when I1 and I0 of the CC register are both set to 1 (level 3). Bit 2 = IPA Interrupt polarity for port A This bit is used to invert the sensitivity of the port A [3:0] external interrupts. It can be set and cleared by software only when I1 and I0 of the CC register are both set to 1 (level 3). 0: No sensitivity inversion 1: Sensitivity inversion Bit 1 = TLIS TLI sensitivity This bit allows to toggle the TLI edge sensitivity. It can be set and cleared by software only when TLIE bit is cleared. 0: Falling edge 1: Rising edge Bit 0 = TLIE TLI enable This bit allows to enable or disable the TLI capabil- ity on the dedicated pin. It is set and cleared by software. 0: TLI disabled 1: TLI enabled Note: a parasitic interrupt can be generated when clearing the TLIE bit. 70 IS11 IS10 IPB IS21 IS20 IPA TLIS TLIE IS11 IS10 External Interrupt Sensitivity IPB bit =0 IPB bit =1 00 Falling edge & low level Rising edge & high level 0 1 Rising edge only Falling edge only 1 0 Falling edge only Rising edge only 1 1 Rising and falling edge IS11 IS10 External Interrupt Sensitivity 0 0 Falling edge & low level 0 1 Rising edge only 1 0 Falling edge only 1 1 Rising and falling edge IS21 IS20 External Interrupt Sensitivity IPA bit =0 IPA bit =1 00 Falling edge & low level Rising edge & high level 0 1 Rising edge only Falling edge only 1 0 Falling edge only Rising edge only 1 1 Rising and falling edge IS21 IS20 External Interrupt Sensitivity 0 0 Falling edge & low level 0 1 Rising edge only 1 0 Falling edge only 1 1 Rising and falling edge |
Similar Part No. - ST72325_07 |
|
Similar Description - ST72325_07 |
|
|
Link URL |
| Privacy Policy |
| ALLDATASHEET.COM |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
English ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
