SH7243 datasheet(581/1726 Pages) RENESAS

581 / 1726 page

Section 11 Multi-Function Timer Pulse Unit 2 (MTU2)

Rev. 1.00 Jun. 26, 2008 Page 551 of 1692

REJ09B0393-0100

11.4.7

Reset-Synchronized PWM Mode

In reset-synchronized PWM mode, three-phase output of positive and negative PWM waveforms

that share a common wave transition point can be obtained by combining channels 3 and 4.

When set for reset-synchronized PWM mode, the TIOC3B, TIOC3D, TIOC4A, TIOC4C,

TIOC4B, and TIOC4D pins function as PWM output pins and TCNT3 functions as an upcounter.

Table 11.52 shows the PWM output pins used. Table 11.53 shows the settings of the registers.

Table 11.52 Output Pins for Reset-Synchronized PWM Mode

Channel

Output Pin

Description

TIOC3B

PWM output pin 1

TIOC3D

PWM output pin 1' (negative-phase waveform of PWM output 1)

TIOC4A

PWM output pin 2

TIOC4C

PWM output pin 2' (negative-phase waveform of PWM output 2)

TIOC4B

PWM output pin 3

TIOC4D

PWM output pin 3' (negative-phase waveform of PWM output 3)

Table 11.53 Register Settings for Reset-Synchronized PWM Mode

Description of Setting

TCNT_3

Initial setting of H'0000

TCNT_4

Initial setting of H'0000

TGRA_3

Set count cycle for TCNT_3

TGRB_3

Sets the turning point for PWM waveform output by the TIOC3B and TIOC3D pins

TGRA_4

Sets the turning point for PWM waveform output by the TIOC4A and TIOC4C pins

TGRB_4

Sets the turning point for PWM waveform output by the TIOC4B and TIOC4D pins

SH7243 Datasheet(PDF) 581 Page - Renesas Technology Corp