| Electronic Components Datasheet Search |
|
7733 Datasheet(PDF) 57 Page - Renesas Technology Corp |
|
|
|||||||||||||||||||||||||||||
7733 Datasheet(HTML) 57 Page - Renesas Technology Corp |
|
57 / 940 page ![]() CENTRAL PROCESSING UNIT (CPU) 7733 Group User’s Manual 2–18 2.4 Memory allocation 2.4 Memory allocation The internal area’s memory allocation is described below. For the external area, refer to section “2.5 Processor modes.” 2.4.1 Memory allocation in internal area SFR (Special Function Register), internal RAM, and internal ROM are allocated in the internal area. (1) SFR (Special Function Register) area Registers required for setting internal peripheral devices are allocated to addresses 016 to 7F16. This area is called “SFR (Special Function Register) area.” Figure 2.4.4 shows the SFR area’s memory map. For each register in the SFR area, refer to the corresponding functional description. For the state of the SFR area immediately after reset, refer to section “13.1.2 State of CPU, SFR area and internal RAM area.” (2) Internal RAM area In the M37733MHBXXXFP, a 3968-byte static RAM is allocated to addresses 8016 to FFF16 (Note). The internal RAM area is used as a data store area and as a stack area. Therefore, it is necessary to give careful consideration to nesting levels in subroutines and multiple interrupts’ levels not to destroy necessary data. (3) Internal ROM area In the M37733MHBXXXFP, a 124-Kbyte mask ROM is allocated to addresses 100016 to 1FFFF16 immediately after reset (Note). The internal ROM’s size and area can be changed by the memory allocation selection bits (bits 0 to 2 at address 6316). Figure 2.4.1 shows the structure of the memory allocation control register and its setting method. Figures 2.4.2 and 2.4.3 show the M37733MHBXXXFP’s memory map. (Refer to section “Appendix 9. Q & A.”) Vector addresses for reset and interrupts (interrupt vector table) are allocated to addresses FFD616 to FFFF16 in the internal ROM. In the microprocessor mode, where the internal ROM area is inhibited from use, the ROM must be allocated to addresses FFD616 to FFFF16. Note: For the other microcomputers of the 7733 Group, refer to section “Appendix 1. Memory allocation of 7733 Group.” |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |