MN35 V2.0 2/05

6

Meter Description

1. LCD Display

2. Hold button

3. Function switch

4. COM jack

5. 10A jack

6. Positive jack

Note: Tilt stand and battery

access is on the rear of unit.

Operating Instructions

Note: If “H” and a blank screen appear when the meter is turned on

the HOLD feature is active. Press the HOLD button to exit the

HOLD mode.

AC or DC Voltage Measurements

1. Insert the black test lead banana plug into the negative COM jack and

the red test lead banana plug into the positive V jack.

2. Turn the rotary switch to the highest VAC or VDC position.

3. Touch the test probes to the circuit under test and read the voltage on

the display.

4. Reset the function switch to successively lower positions to obtain a

higher resolution reading. If the polarity is reversed (DC voltage only),

the display will show (-) minus before the value.