MN35 datasheet(9/10 Pages) EXTECH

9 / 10 page

MN35 V2.0 2/05

Data Hold

Press the Hold button to freeze the reading in the display. “H” will

appear in the LCD. Press the key again to release the display.

Maintenance

WARNING: To avoid electric shock, disconnect the test leads from

any source of voltage before removing the battery/fuse cover.

WARNING: To avoid electric shock, do not operate your meter until

the battery/fuse cover is in place and fastened securely.

This Multimeter is designed to provide years of dependable service, if the

following care instructions are performed.

1. Keep the meter dry.

2. Use and store the meter in mild ambient conditions. Temperature

extremes can shorten the life of the electronic parts and distort or melt

plastic parts.

3. Handle the meter gently. Dropping it can damage the electronic parts

or the case.

4. Keep the meter clean. Wipe the case occasionally with a damp cloth.

DO NOT use chemicals, cleaning solvents or detergents.

5. Use only fresh batteries of the recommended size and type. Remove

old or weak batteries so they do not leak and damage the unit.

6. If the meter is to be stored for a long period of time, the batteries

should be removed to prevent damage to the unit.

MN35 Datasheet(PDF) 9 Page - Extech Instruments Corporation.