LPC1102

All information provided in this document is subject to legal disclaimers.

© NXP B.V. 2011. All rights reserved.

Product data sheet

Rev. 4 — 24 June 2011

16 of 39

NXP Semiconductors

LPC1102

32-bit ARM Cortex-M0 microcontroller

8.

Limiting values

[1]

The following applies to the limiting values:

a) This product includes circuitry specifically designed for the protection of its internal devices from the damaging effects of excessive

static charge. Nonetheless, it is suggested that conventional precautions be taken to avoid applying greater than the rated

maximum.

otherwise noted.

[2]

Including voltage on outputs in 3-state mode.

[3]

The peak current is limited to 25 times the corresponding maximum current.

[4]

The maximum non-operating storage temperature is different than the temperature for required shelf life which should be determined

based on required shelf lifetime. Please refer to the JEDEC spec (J-STD-033B.1) for further details.

[5]

Human body model: equivalent to discharging a 100 pF capacitor through a 1.5 k

 series resistor.

Table 4.

Limiting values

In accordance with the Absolute Maximum Rating System (IEC 60134).[1]

Symbol

Parameter

Conditions

Min

Max

Unit

supply voltage (core and external rail)

1.8

3.6

V

input voltage

5 V tolerant I/O

pins; only valid

supply voltage is

present

[2]

0.5

+5.5

V

supply current

per supply pin

[3] -

100

mA

ground current

per ground pin

[3] -

100

mA

I/O latch-up current

(0.5V

-

100

mA

storage temperature

non-operating

[4]

65

+150

C

maximum junction temperature

-

150

C

total power dissipation (per package)

based on package

heat transfer, not

device power

consumption

-1.5

W

electrostatic discharge voltage

human body

model; all pins

[5]

6500

+6500

V