| Electronic Components Datasheet Search |
|
SC5010 Datasheet(PDF) 20 Page - Semtech Corporation |
|
|
|||||||||||||||||||||||||||||
SC5010 Datasheet(HTML) 20 Page - Semtech Corporation |
|
20 / 36 page ![]() SC5010 20 lator to the SYNC input. Figures on page 11 show synchronization of SC5010 to a 48kHz HSYNC signal applied on SYNC pin. The turn-on of the LED string IO1 (falling edge of V IO1 ) is synchronized to the rising edge of the HSYNC input. The turn-on of rest of the strings will be delayed based on the phase shifting algorithm. Another figure shows the delay (~500ns) between HSYNC rising edge and turn-on of the LED string 1 (IO1). Input Disconnect The SC5010 incorporates a high voltage (up to 27V) p- MOSFET gate driver which can be used for controlling an Table 2 — Fault Protection Descriptions Type of Fault User Disable? Fault Criteria Action on Fault Recovery Device FLT pin (latching / non-latching Condition(s) FLT pin Input Under-voltage at VIN (UVLO) No V IN < 1 + R 2 /R 1 ) x 1.23 (rising) No Startup Not Active V UVLO > 1.23V (rising) High No V IN < (1 + R 2 /R 1 ) × 1.23V - I UVLO × R 1 (falling) Shutdown Not active V UVLO > 1.23V (rising) High Input Under-volage at VCC (UVLO) No VCC < 4.2V (rising) No Startup Not active VCC > 4.2V (rising) High No VCC < 4.0V (falling) Shutdown Not active VCC > 4.2V (rising) High Over-voltage Protection (OVP) No V OVP > 1.2V (rising) Regulate to OVP threshold: I O(n) = “on” Low (non-latching) V OVP > 1.2V (falling) High on re- moval of fault condition Over-current Protection (OCP) No V CS > 0.4V Limit Q1 FET drain current < 0.4V/R3 (typ) High V CS > 0.4V High Shorted LED(s) Yes, tie SCP to VCC V IO(n) > 20 x V SCP Device on: I O(n) = “off” Other I O(All) = “on” Low (latching) Replace shorted LED(s) and Toggle EN, VCC or UVLO High V IO(All) > 20 x V SCP Device latch-off; I O(All) = “off” Low (latching) Replace shorted LED(s) and Toggle EN, VCC or UVLO High Open LED(s) No V IO(n) < 0.1V and OVP event Device on: I O(n) = “off” Other I O(All) = “on” Low (latching) Replace open LED(s) and Toggle EN, VCC or UVLO High V IO(All) < 0.1V and OVP event Device latch-off; I O(All) = “off” Low (latching) Replace open LED(s) and Toggle EN, VCC or UVLO High Over-Tempera- ture Protection (OTP) No TJ > 150ºC (typ) Device off; I O(All) = “off” Low (latching) Satisfy T HYS > 10ºC; Device on; I O(All) = “on”; Toggle EN, VCC or UVLO High Note: Refer to the application circuit example on page 21. Applications Information (continued) |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |