| Electronic Components Datasheet Search |
|
MCP25020I/P Datasheet(PDF) 28 Page - Microchip Technology |
|
|
|||||||||||||||||||||||||||||
MCP25020I/P Datasheet(HTML) 28 Page - Microchip Technology |
|
28 / 66 page ![]() MCP2502X/5X DS21664D-page 28 © 2007 Microchip Technology Inc. If the Error Condition message is enabled (OPTREG2.TXONE = 1) and one of the above conditions occur, the MCP2502X/5X sends TXID1 identifier with output message Read CAN Error States data field (three data bytes). 4.5.4 SCHEDULED TRANSMISSIONS The MCP2502X/5X has the capability of sending scheduled transmissions (On Bus message), if enabled. The scheduled transmission control register (STCON) enables and configures the occurrence of the scheduled message. Setting the STEN bit in the STCON register enables the scheduled message. The STBF1:STBF0 and STM3:STM0 bits allow a scheduled transmission to be initiated from a minimum of 256 µs to a maximum of 16.8 seconds (using a 16 MHz FOSC) and the following equation: Message Type - The message sent for scheduled transmissions consists of either TXID0 with zero data bytes or TXID0 with eight data bytes containing the Read A/D Regs message, depending on STMS bit in the STCON register. REGISTER 4-1: STCON - SCHEDULED TRANSMISSION CONTROL REGISTER Note: The actual scheduled transmission intervals may vary slightly due to the internal event que of the control module. Scheduled Transmission = STBF1:STBF0(STM3:STM0) R/W-0 R/W-0 R/W-1 R/W-1 R/W-1 R/W-1 R/W-1 R/W-1 STEN STMS STBF1 STBF0 STM3 STM2 STM1 STM0 bit 7 bit 0 bit 7 STEN: Scheduled Transmission Enable bits 1 = Enabled 0 =Disabled bit 6 STMS: Scheduled Transmission Message Select 1 = Sends Transmit ID 0 (TXID0) with the “Read A/D Regs” data (DLC = 8) 0 = Sends Transmit ID 0 (TXID0) with no data (DLC = 0) bit 5-4 STBF1:STBF0: Base Transmission Frequency bits 00 = 4096TOSC 01 = 16 •(4096TOSC) 10 = 256 •(4096TOSC) 10 = 4096 •(4096TOSC) (e.g., STBF1:STBF0 => 00 => 256 µs for a 16 MHz FOSC) bit 3-0 STM3:STM0: Scheduled Transmission Multiplier bits 0000 = 1 0001 = 2 - - 1110 = 15 1111 = 16 Legend: R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’ - n = Value at POR ‘1’ = Bit is set ‘0’ = Bit is cleared x = Bit is unknown |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |