| Electronic Components Datasheet Search |
|
DOC7707 Datasheet(PDF) 101 Page - List of Unclassifed Manufacturers |
|
|
|||||||||||||||||||||||||||||
DOC7707 Datasheet(HTML) 101 Page - List of Unclassifed Manufacturers |
|
101 / 307 page ![]() 101 7707F–AVR–11/10 AT90USB82/162 • Bits 7:6 – COM01A:0: Compare Match Output A Mode These bits control the Output Compare pin (OC0A) behavior. If one or both of the COM0A1:0 bits are set, the OC0A output overrides the normal port functionality of the I/O pin it is connected to. However, note that the Data Direction Register (DDR) bit corresponding to the OC0A pin must be set in order to enable the output driver. When OC0A is connected to the pin, the function of the COM0A1:0 bits depends on the WGM02:0 bit setting. Table 14-2 shows the COM0A1:0 bit functionality when the WGM02:0 bits are set to a normal or CTC mode (non-PWM). Table 14-3 shows the COM0A1:0 bit functionality when the WGM01:0 bits are set to fast PWM mode. Note: 1. A special case occurs when OCR0A equals TOP and COM0A1 is set. In this case, the Com- pare Match is ignored, but the set or clear is done at TOP. See “Fast PWM Mode” on page 96 for more details. Table 14-4 shows the COM0A1:0 bit functionality when the WGM02:0 bits are set to phase cor- rect PWM mode. Initial Value 0 0 0 0 0 0 0 0 Table 14-2. Compare Output Mode, non-PWM Mode COM0A1 COM0A0 Description 0 0 Normal port operation, OC0A disconnected. 0 1 Toggle OC0A on Compare Match 1 0 Clear OC0A on Compare Match 1 1 Set OC0A on Compare Match Table 14-3. Compare Output Mode, Fast PWM Mode (1) COM0A1 COM0A0 Description 0 0 Normal port operation, OC0A disconnected. 01 WGM02 = 0: Normal Port Operation, OC0A Disconnected. WGM02 = 1: Toggle OC0A on Compare Match. 1 0 Clear OC0A on Compare Match, set OC0A at TOP 1 1 Set OC0A on Compare Match, clear OC0A at TOP Table 14-4. Compare Output Mode, Phase Correct PWM Mode (1) COM0A1 COM0A0 Description 0 0 Normal port operation, OC0A disconnected. 01 WGM02 = 0: Normal Port Operation, OC0A Disconnected. WGM02 = 1: Toggle OC0A on Compare Match. 10 Clear OC0A on Compare Match when up-counting. Set OC0A on Compare Match when down-counting. 11 Set OC0A on Compare Match when up-counting. Clear OC0A on Compare Match when down-counting. |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |