AM79C975VCW datasheet(212/304 Pages) AMD

212 / 304 page

212

Am79C973/Am79C975

P R E L I M INARY

initiated transmission when oper-

ating in half-duplex mode. The

Am79C973/Am79C975 controller

does not retry upon loss of carri-

er. It will continue to transmit the

whole frame until done. LCAR will

not be set when the device is op-

erating in full-duplex mode. LCAR

is not valid in Internal Loopback

Mode.

LCAR

set

the

Am79C973/Am79C975 controller

and cleared by the host.

LCAR will be set when the PHY is

in Link Fail state during transmis-

sion.

RTRY

Retry error indicates that the

transmitter has failed after 16 at-

tempts to successfully transmit a

message, due to repeated colli-

sions on the medium. If DRTY is

set to 1 in the MODE register,

RTRY will set after one failed

transmission attempt. RTRY is

set

the

Am79C973/

Am79C975

controller

and

cleared by the host.

25-4

RES

Reserved locations.

3-0

TRC

Transmit Retry Count. Indicates

the number of transmit retries of

the associated packet. The maxi-

mum count is 15. However, if a

RETRY error occurs, the count

will roll over to 0.

In this case only, the Transmit

Retry Count value of 0 should be

interpreted as meaning 16. TRC

is written by the Am79C973/

Am79C975 controller into the last

transmit descriptor of a frame, or

when

error

terminates

frame. Valid only when OWN is

cleared to 0.

TMD3

Bit

Name

Description

31-0

User Space. Reserved for user

defined space.

AM79C975VCW Datasheet(PDF) 212 Page - Advanced Micro Devices

AM79C975VCW Datasheet(HTML) 212 Page - Advanced Micro Devices

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL