DocID027622 Rev 2

5/21

UM1872

Getting started

21

2

Getting started

This section describes the hardware requirements for the X-NUCLEO-IDS01Ax evaluation

boards.

2.1

Hardware requirements

The X-NUCLEO-IDS01Ax is an expansion board for use with the STM32 Nucleo. To

function correctly, the X-NUCLEO-IDS01Ax must be connected to the STM32 Nucleo board

as shown in Figure 2 below.

The STM32 Nucleo firmware and related documentation is available on www.st.com at

http://www.st.com/stm32nucleo

Figure 2. X-NUCLEO-IDS01Ax plugged to STM32 Nucleo board

The interconnection between the STM32 Nucleo and the X-NUCLEO-IDS01Ax has been

designed to permit the use of any STM32 Nucleo board, although complete testing has

been performed using the NUCLEO-L053R8 and NUCLEO-F401RE hosting the ultra-low

power STM32.