TFP410

TI PanelBus DIGITAL TRANSMITTER

SLDS145A – OCTOBER 2001 – REVISED JANUARY 2002

1

POST OFFICE BOX 655303

(25 MHz – 165 MHz Pixel Rates)

– 12-Bit, Dual-Edge and 24-Bit,

Single-Edge Input Modes

– Adjustable 1.1 V to 1.8 V and Standard

3.3 V CMOS Input Signal Levels

– Fully Differential and Single-Ended Input

Clocking Modes

– Standard Intel 12-Bit Digital Video Port

Compatible as on Intel

 81x Chipsets

– On-Chip Regulators and Bypass

Capacitors for Reducing System Costs

– No HSYNC Jitter Anomaly

– Negligible Data-Dependent Jitter

Receiver Detection

Package

Process Technology

description

The TFP410 is a Texas Instruments PanelBus flat panel display product, part of a comprehensive family of

end-to-end DVI 1.0-compliant solutions, targeted at the PC and consumer electronics industry.

The TFP410 provides a universal interface to allow a glue-less connection to most commonly available graphics

controllers. Some of the advantages of this universal interface include selectable bus widths, adjustable signal

levels, and differential and single-ended clocking. The adjustable 1.1-V to 1.8-V digital interface provides a

low-EMI, high-speed bus that connects seamlessly with 12-bit or 24-bit interfaces. The DVI interface supports

flat panel display resolutions up to UXGA at 165 MHz in 24-bit true color pixel format.

The TFP410 combines PanelBus circuit innovation with TI’s advanced 0.18

µm EPIC-5 CMOS process

technology and TI’s ultralow ground inductance PowerPAD package. The result is a compact 64-pin TQFP

package providing a reliable, low-current, low-noise, high-speed digital interface solution.

This device contains circuits to protect its inputs and outputs against damage due to high static voltages or electrostatic fields. These

circuits have been qualified to protect this device against electrostatic discharges (ESD) of up to 2 kV according to MIL-STD-883C,

Method 3015; however, it is advised that precautions be taken to avoid application of any voltage higher than maximum-rated

voltages to these high-impedance circuits. During storage or handling, the device leads should be shorted together or the device

should be placed in conductive foam. In a circuit, unused inputs should always be connected to an appropriated logic voltage level,

preferably either VCC or ground. Specific guidelines for handling devices of this type are contained in the publication Guidelines for

Handling Electrostatic-Discharge-Sensitive (ESDS) Devices and Assemblies available from Texas Instruments.

Copyright

 2002, Texas Instruments Incorporated

PRODUCTION DATA information is current as of publication date.

Products conform to specifications per the terms of Texas Instruments

standard warranty. Production processing does not necessarily include

testing of all parameters.

Footnote:

1. The digital visual interface (DVI) specification is an industry standard developed by the digital display working group (DDWG) for high-speed

digital connection to digital displays and has been adopted by industry-leading PC and consumer electronics manufacturers. The TFP410

is compliant to the DVI Revision 1.0 specification.

PanelBus, PowerPAD, and EPIC-5 are trademarks of Texas Instruments.

VESA is a trademark of Video Electronics Standards Association.

Intel is a trademark of Intel Corporation.

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of

Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.