SC2200 datasheet(283/433 Pages) NSC

283 / 433 page

Revision 3.0

283

www.national.com

Core Logic Module (Continued)

5.4.5

X-Bus Expansion Interface - Function 5

The register space designated as Function 5 (F5) is used

to configure the PCI portion of support hardware for

accessing the X-Bus Expansion support registers. The bit

formats for the PCI Header Registers are given in Table 5-

39.

Located in the PCI Header Registers of F5 are six Base

Address Registers (F5BARx) used for pointing to the regis-

ter spaces designated for X-Bus Expansion support,

described later in this section.

Table 5-39. F5: PCI Header Registers for X-Bus Expansion

Bit

Description

Index 00h-01h

Vendor Identification Register (RO)

Reset Value: 100Bh

Index 02h-03h

Device Identification Register (RO)

Reset Value: 0505h

Index 04h-05h

PCI Command Register (R/W)

Reset Value: 0000h

15:2

Reserved. (Read Only)

Memory Space. Allow the Core Logic module to respond to memory cycles from the PCI bus.

0: Disable.

1: Enable.

If F5BAR0, F5BAR1, F5BAR2, F5BAR3, F5BAR4, and F5BAR5 (F5 Index 10h, 14h, 18h, 1Ch, 20h, and 24h) are defined as

allowing access to memory mapped registers, this bit must be set to 1. BAR configuration is programmed through the corre-

sponding mask register (see F5 Index 40h, 44h, 48h, 4Ch, 50h, and 54h)

I/O Space. Allow the Core Logic module to respond to I/O cycle from the PCI bus.

0: Disable.

1: Enable.

If F5BAR0, F5BAR1, F5BAR2, F5BAR3, F5BAR4, and F5BAR5 (F5 Index 10h, 14h, 18h, 1Ch, 20h, and 24h) are defined as

allowing access to I/O mapped registers, this bit must be set to 1. BAR configuration is programmed through the corre-

sponding mask register (see F5 Index 40h, 44h, 48h, 4Ch, 50h, and 54h)

Index 06h-07h

PCI Status Register (RO)

Reset Value: 0280h

Index 08h

Device Revision ID Register (RO)

Reset Value: 00h

Index 09h-0Bh

PCI Class Code Register (RO)

Reset Value: 068000h

Index 0Ch

PCI Cache Line Size Register (RO)

Reset Value: 00h

Index 0Dh

PCI Latency Timer Register (RO)

Reset Value: 00h

Index 0Eh

PCI Header Type (RO)

Reset Value: 00h

Index 0Fh

PCI BIST Register (RO)

Reset Value: 00h

Index 10h-13h

Base Address Register 0 - F5BAR0 (R/W)

Reset Value: 00000000h

X-Bus Expansion Address Space. This register allows PCI access to I/O mapped X-Bus Expansion support registers. Bits [5:0] must

be set to 000001, indicating a 64-byte aligned I/O address space. Refer to Table 5-40 on page 286 for the X-Bus Expansion configura-

tion register bit formats and reset values.

Note:

The size and type of accessed offsets can be reprogrammed through F5BAR0 Mask Register (F5 Index 40h).

31:6

X-Bus Expansion Base Address.

5:0

Address Range. This bit field must be set to 000001 for this register to operate correctly.

Index 14h-17h

Base Address Register 1 - F5BAR1 (R/W)

Reset Value: 00000000h

Reserved. Reserved for possible future use by the Core Logic module.

Configuration of this register is programmed through the F5BAR1 Mask Register (F5 Index 44h)

Index 18h-1Bh

Base Address Register 2 - F5BAR2 (R/W)

Reset Value: 00000000h

Reserved. Reserved for possible future use by the Core Logic module.

Configuration of this register is programmed through the F5BAR1 Mask Register (F5 Index 48h)

Index 1Ch-1Fh

Base Address Register 3 - F5BAR3 (R/W)

Reset Value: 00000000h

Reserved. Reserved for possible future use by the Core Logic module.

Configuration of this register is programmed through the F5BAR3 Mask Register (F5 Index 4Ch).

SC2200 Datasheet(PDF) 283 Page - National Semiconductor (TI)

SC2200 Datasheet(HTML) 283 Page - National Semiconductor (TI)

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL