TFP510

TI PanelBus DIGITAL TRANSMITTER

SLDS146B – JANUARY 2002 – REVISED DECEMBER 2002

1

POST OFFICE BOX 655303

(25-MHz–165-MHz Pixel Rates)

– 12-Bit, Dual-Edge and 24-Bit,

Single-Edge Input Modes

– Adjustable 1.1-V to 1.8-V and Standard

3.3-V CMOS Input Signal Levels

– Fully Differential and Single-Ended Input

Clocking Modes

– Standard Intel 12-Bit Digital Video Port

Compatible as on Intel

 81x Chipsets

– On-Chip Regulators and Bypass

Capacitors for Reducing Systems Costs

– No HSYNC Jitter Anomaly

– Negligible Data-Dependent Jitter

Receiver Detection

Package

Process Technology

Transmitters

description

The TFP510 is a Texas Instruments PanelBus flat panel display product, part of a comprehensive family of

end-to-end DVI 1.0 compliant solutions, targeted at the PC and consumer electronics industry.

The TFP510 provides a universal interface to allow a glueless connection to most commonly available graphics

controllers. Some of the advantages of this universal interface include selectable bus widths, adjustable signal

levels, and differential and single-ended clocking. The adjustable 1.1-V to 1.8-V digital interface provides a

low-EMI, high-speed bus that connects seamlessly with 12-bit or 24-bit interfaces. The DVI interface supports

flat panel display resolutions up to UXGA at 165 MHz in 24-bit true color pixel format.

The TFP510 combines PanelBus circuit innovation with TI’s advanced 0.18

µm EPIC-5 CMOS process

technology and TI’s ultralow ground inductance PowerPAD package. The result is a compact 64-pin TQFP

package providing a reliable, low-noise, high-speed digital interface solution.

Copyright

 2002, Texas Instruments Incorporated

PRODUCTION DATA information is current as of publication date.

Products conform to specifications per the terms of Texas Instruments

standard warranty. Production processing does not necessarily include

testing of all parameters.

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of

Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

Footnotes:

1.

The digital visual interface (DVI) specification is an industry standard developed by the digital display working group (DDWG) for

high-speed digital connection to digital displays. The TFP510 is compliant to the digital visual interface (DVI) Revision 1.0

specification. The DVI 1.0 specification has been adopted by the industry leading PC and consumer electronics manufacturers.

2.

.The high–bandwidth digital content protection system (HDCP) is an industry standard for protecting DVI outputs from being copied.

HDCP was developed by Intel Corporation and is licensed by the Digital Content Protection, LLC. The TFP510 is compliant to the

HDCP Rev. 1.0 specification.

PanelBus, PowerPAD, and EPIC-5 are trademarks of Texas Instruments.

Intel is a trademark of Intel Corporation.