Electronic Components Datasheet Search
  English  ▼

X  

PC7410 Datasheet(PDF) 10 Page - ATMEL Corporation

Part # PC7410
Description  PowerPC 7410 RISC Microprocessor Product Specification
PDF  54 Pages
Scroll/Zoom Zoom In 100%  Zoom Out
Manufacturer  ATMEL [ATMEL Corporation]
Direct Link  http://www.atmel.com
Logo ATMEL - ATMEL Corporation

PC7410 Datasheet(HTML) 10 Page - ATMEL Corporation

Back Button PC7410 Datasheet HTML 6Page - ATMEL Corporation PC7410 Datasheet HTML 7Page - ATMEL Corporation PC7410 Datasheet HTML 8Page - ATMEL Corporation PC7410 Datasheet HTML 9Page - ATMEL Corporation PC7410 Datasheet HTML 10Page - ATMEL Corporation PC7410 Datasheet HTML 11Page - ATMEL Corporation PC7410 Datasheet HTML 12Page - ATMEL Corporation PC7410 Datasheet HTML 13Page - ATMEL Corporation PC7410 Datasheet HTML 14Page - ATMEL Corporation Next Button
Zoom Inzoom in Zoom Outzoom out
 10 / 54 page
background image
10
PC7410
2141D–HIREL–02/04
Figure 3. Overshoot/Undershoot Voltage
The PC7410 provides several I/O voltages to support both compatibility with existing
systems and migration to future systems. The PC7410 “core” voltage must always be
provided at nominal voltage (see Table 4 for actual recommended core voltage). Volt-
age to the L2 I/Os and processor interface I/Os are provided through separate sets of
supply pins and may be provided at the voltages shown in Table 3. The input voltage
threshold for each bus is selected by sampling the state of the voltage select pins at the
negation of the signal HRESET. The output voltage will swing from GND to the maxi-
mum voltage applied to the OV
DD or L2OVDD power pins.
Notes:
1. Caution: The input threshold selection must agree with the OV
DD/L2OVDD voltages
supplied.
2. To select the 2.5V threshold option, L2VSEL/BVSEL should be tied to HRESET so
that the two signals change state together. This is the preferred method for selecting
this mode operation.
3. To overcome the internal pull-up resistance, a pull-down resistance less than 250
Ω
should be used.
4. Default voltage setting if left unconnected (internal pulled-up). Parts Rev 1.4 and later
only. Previous revisions do not support 3.3V OVDD, the default voltage setting if left
unconnected is 2.5V.
5. Parts Rev 1.4 and later only. Previous revisions do not support 3.3V OVDD, having
BVSEL = 1 selects the 2.5V threshold.
6. Parts Rev 1.4 and later only. Previous revisions do not support BVSEL = HRESET.
7. NSpec does not support the default OVDD setting of 3.3V. The BVSEL input must be
tie either low or HRESET.
Table 3. Input Threshold Voltage Setting
BVSEL Signal
Processor Bus Input
Threshold is Relative to:
L2VSEL
Signal(3)
L2 Bus Input Threshold
is Relative to:
0(1)
1.8V
0
1.8
HRESET(1)(2)
2.5V
HRESET
2.5
1(1)(4)(5)
3.3V(7)
12.5
HRESET(6)
3.3V(7)
HRESET
Not supported
Not to exceed
10% of tSYSCLK
(L2)OVDD + 20%
(L2)OVDD + 5%
(L2)OVDD
VIH
VIL
GND
GND - 0.3V
GND - 0.7V



Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54


Datasheet Download

Go To PDF Page


Link URL



Does ALLDATASHEET help your business so far?  [ DONATE ] 

About Alldatasheet   |   Advertisement   |   Contact us   |   Privacy Policy   |   Link to Datasheet    |   Link Exchange   |   Manufacturer List
All Rights Reserved©Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com