| Electronic Components Datasheet Search |
|
DLPC4430 Datasheet(PDF) 18 Page - Texas Instruments |
|
|
|
|||||||||||||||||||||||||||||
DLPC4430 Datasheet(HTML) 18 Page - Texas Instruments |
|
18 / 49 page ![]() 6.6 System Oscillators Timing Requirements over operating free-air temperature range(unless otherwise noted) PARAMETER TEST CONDITIONS MIN MAX UNIT SYSTEM OSCILLATORS fclock Clock frequency, MOSC(1) 19.998 20.002 MHz tc Cycle time, MOSC(1) 49.995 50.005 MHz tw(H) Pulse duration(2), MOSC, high 50% to 50% reference points (signal) 20 ns tw(L) Pulse duration(2), MOSC, low 50% to 50% reference points (signal) 20 ns tt Transition time(2), MOSC, tt = tf /tr 20% to 80% reference points (signal) 12 ns tjp Period Jitter(2), MOSC (This is the deviation in period from the ideal period due solely to high frequency jitter). 18 ps (1) The frequency range for MOSC is 20 MHz with +/-100 PPM accuracy (it includes impact to accuracy due to aging, temperature and trim sensitivity). The MOSC input cannot support spread spectrum clock spreading. (2) Applies only when driven via an external digital oscillator. 6.7 Test and Reset Timing Requirements MIN MAX UNIT tW1(L) Pulse duration, inactive low, PWRGOOD 50% to 50% reference points (signal) 4.0 µs tW1(L) Pulse duration, inactive low, PWRGOOD 50% to 50% reference points (signal) 1000(2) ms tt1 Transition time, PWRGOOD, tt1= tf/tr 20% to 80% reference points (signal) 625 µs tW2(L) Pulse duration, inactive low, POSENSE 50% to 50% reference points (signal) 500 µs tW2(L) Pulse duration, inactive low, POSENSE 50% to 50% reference points (signal) 1000(2) ms tt2 Transition time, POSENSE, tt1= tf/tr 20% to 80% reference points (signal) 25(1) µs tPH Power Hold time, POSENSE remains active after PWRGOOD is de-asserted 20% to 80% reference points (signal) 500 µs tEW Early Warning time, PWRGOOD goes inactive low prior to any power supply voltage going below its specification 500 µs tW1(L) +tW2(L) The sum of PWRGOOD and POSENSE inactive time 1050(2) ms (1) As long as noise on this signal is below the hysteresis threshold. (2) With 1.8 V power applied. If the 1.8 V power is disabled by the controller command (For example – if system is placed in Low Power mode where the controller disables 1.8 V power), these signals can be placed and remain in their inactive state indefinitely. DLPC4430 DLPS223 – DECEMBER 2021 www.ti.com 18 Submit Document Feedback Copyright © 2021 Texas Instruments Incorporated Product Folder Links: DLPC4430 |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |