11 Device and Documentation Support

11.1 Device Support

11.1.1 Development Support

PSpice® for TI is a design and simulation environment that helps evaluate performance of analog circuits. Create

subsystem designs and prototype solutions before committing to layout and fabrication, reducing development

cost and time to market.

11.1.1.2 TINA-TI™ Simulation Software (Free Download)

addition to a range of both passive and active models. TINA-TI simulation software provides all the conventional

dc, transient, and frequency domain analysis of SPICE, as well as additional design capabilities.

Available as a free download from the Analog eLab Design Center, TINA-TI simulation software offers extensive

post-processing capability that allows users to format results in a variety of ways. Virtual instruments offer

the ability to select input waveforms and probe circuit nodes, voltages, and waveforms, creating a dynamic

quick-start tool.

Note

Download the free TINA-TI software from the TINA-TI™ folder.

11.1.1.3 DIP Adapter EVM

The DIP Adapter EVM tool provides an easy, low-cost way to prototype small surface mount ICs. The evaluation

tool these TI packages: D or U (8-pin SOIC), PW (8-pin TSSOP), DGK (8-pin VSSOP), DBV (6-pin SOT-23,

5-pin SOT23, and 3-pin SOT-23), DCK (6-pin SC-70 and 5-pin SC-70), and DRL (6-pin SOT-563). The DIP

Adapter EVM may also be used with terminal strips or may be wired directly to existing circuits.

11.1.1.4 Universal Op Amp EVM

The Universal Op Amp EVM is a series of general-purpose, blank circuit boards that simplify prototyping circuits

for a variety of IC package types. The evaluation module board design allows many different circuits to be

constructed easily and quickly. Five models are offered, with each model intended for a specific package type.

PDIP, SOIC, VSSOP, TSSOP and SOT-23 packages are all supported.

Note

These boards are unpopulated, so users must provide their own ICs. TI recommends requesting

several op amp device samples when ordering the Universal Op Amp EVM.

11.1.1.5 TI Precision Designs

TI Precision Designs are analog solutions created by TI’s precision analog applications experts and offer the

theory of operation, component selection, simulation, complete PCB schematic and layout, bill of materials,

and measured performance of many useful circuits. TI Precision Designs are available online at http://

www.ti.com/ww/en/analog/precision-designs/.

11.1.1.6 WEBENCH® Filter Designer

WEBENCH® Filter Designer is a simple, powerful, and easy-to-use active filter design program. The WEBENCH

Filter Designer lets you create optimized filter designs using a selection of TI operational amplifiers and passive

components from TI's vendor partners.

Available as a web-based tool from the WEBENCH® Design Center, WEBENCH® Filter Designer allows you to

design, optimize, and simulate complete multistage active filter solutions within minutes.

www.ti.com

OPA2328

SBOS957 – FEBRUARY 2022

Copyright © 2022 Texas Instruments Incorporated

Submit Document Feedback

19

Product Folder Links: OPA2328