| Electronic Components Datasheet Search |
|
NORAB100 Datasheet(PDF) 9 Page - List of Unclassifed Manufacturers |
|
|
|||||||||||||||||||||||||||||
NORAB100 Datasheet(HTML) 9 Page - List of Unclassifed Manufacturers |
|
9 / 46 page ![]() NORA-B1 series - Data sheet UBX-20027119 - R10 Functional description Page 9 of 46 C1 – Public Item NORA-B100 NORA-B101 NORA-B106 NORA-B120 NORA-B121 NORA-B126 DPPI: up to 32 channels IPC: up to 16 channels MUTEX: up to 16 instances Radio Supported 2.4 GHz radio modes Bluetooth LE, v5.2 IEEE 802.15.4 Proprietary modes Band support 2.4 GHz, 40 channels Typical conducted output power +3.0 dBm +3.0 dBm +3.0 dBm +13 dBm +13 dBm +13 dBm Radiated output power (EIRP with approved antennas) +8.3 dBm +8.3 dBm +5 dBm +18 dBm +18 dBm +15 dBm RX sensitivity (Bluetooth LE, conducted) LE 1M PHY LE 2M PHY CODED PHY (125 kbps) –98 dBm –95 dBm –104 dBm –98 dBm –95 dBm –104 dBm –98 dBm –95 dBm –104 dBm –103 dBm –99 dBm –109 dBm –103 dBm –99 dBm –109 dBm –103 dBm –99 dBm –109 dBm Antenna type U.FL connector Pin PCB trace U.FL connector Pin PCB trace Bluetooth Supported Bluetooth LE modes LE 1M PHY (1 Mbps) LE 2M PHY (2 Mbps) LE Coded PHY S=2 (500 kbps) LE Coded PHY S=8 (125 kbps) IEEE 802.15.4 Thread Stack OpenThread, Thread 1.1 Thread security AES-128, co-processor accelerated Zigbee stack Zigbee compliant platform Other 1 Mbps, 2 Mbps Nordic-proprietary Dimensions 14.3 x 10.4 x 1.7 mm Weight 0.55 g 0.53 g 0.53 g TBD TBD TBD Table 1: NORA-B1 series characteristics summary 1.5 Hardware options NORA-B10 and NORA-B12 modules are based on the Nordic Semiconductor nRF5340 SoC. Designed for use with an external antenna, NORA-B12 modules additionally include a Skyworks SKY66405-11 front-end module (FEM) [9] with an integrated power amplifier (PA) in the transmitter and low noise amplifier (LNA) in the receiver. Both NORA-B10 and NORA-B12 module variants are equipped with either a U.FL connector, antenna pad, or PCB antenna. See also RF antenna interfaces. Aside from the antenna interface type and FEM, NORA-B1 modules have identical hardware configurations. All module interfaces or functions must be allocated to a GPIO signal and two of these are dedicated to FEM control in NORA-B12. See also GPIO. The integrated DC-DC converter facilitates higher efficiency under heavy load situations. See also Power management. For more information about the antennas approved for use with NORA-B1 series, see also the system integration manual [1]. |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |