8.3 On-Leakage Current

Source On-Leakage current is defined as the leakage current flowing into or out of the source pin when the

switch is on. This current is denoted by the symbol IS(ON).

Drain On-Leakage current is defined as the leakage current flowing into or out of the drain pin when the switch is

on. This current is denoted by the symbol ID(ON).

Either the source pin or drain pin is left floating during the measurement. Figure 8-3 shows the circuit used for

measuring the On-Leakage current, denoted by IS(ON) or ID(ON).

S

GND

VS

D

A

Is (ON)

VDD

VSS

IS(ON)

N.C.

S

GND

VD

D

A

ID (ON)

VDD

VSS

ID(ON)

N.C.

Figure 8-3. On-Leakage Measurement Setup

8.4 tON and tOFF Time

Turn-on time is defined as the time taken by the output of the device to rise to 90% after the enable has risen

past the logic threshold. The 90% measurement is utilized to provide the timing of the device. System level

timing can then account for the time constant added from the load resistance and load capacitance. Figure 8-4

shows the setup used to measure Turn-On time, denoted by the symbol tON.

Turn-off time is defined as the time taken by the output of the device to fall to 10% after the enable has fallen

past the logic threshold. The 10% measurement is utilized to provide the timing of the device. System level

timing can then account for the time constant added from the load resistance and load capacitance. Figure 8-4

shows the setup used to measure Turn-Off time, denoted by the symbol tOFF.

3 V

VSEL

0 V

50%

50%

tON

tOFF

10%

90%

Output

tr < 20 ns

tf < 20 ns

RL

CL

VDD

VSS

VDD

VSS

0.1 µF

0.1 µF

S

GND

D

SEL

Output

0 V

VSEL

VS

Figure 8-4. Turn-On and Turn-Off Time Measurement Setup

www.ti.com

TMUX6201, TMUX6202

SCDS450A – NOVEMBER 2022 – REVISED MARCH 2023

Copyright © 2023 Texas Instruments Incorporated

Submit Document Feedback

21

Product Folder Links: TMUX6201 TMUX6202