www.ti.com

4.1

Regulatory, Safety and Warranty Notices

4.2

Warranty and Liability

Regulatory, Safety and Warranty Notices

An RFID system comprises an RF transmission device, and is therefore subject to national and

international regulations.

A system reading from or writing to these transponders may be operated only under an experimental

license or final approval issued by the relevant approval authority. Before any such device or system can

be marketed, an equipment authorization must be obtained form the relevant approval authority.

The Tag-it HF-I Standard Transponder IC has been manufactured using state-of-the-art technology and in

accordance with the recognized safety rules.

Observe precautions in operating instructions

• Condition for the safe processing, handling and fault-free operation of the Tag-it HF-I Standard

Transponder IC is the knowledge of the basic safety regulations.

• All persons who operate with the Tag-it HF-I Standard Transponder IC must observe the guidelines

and particularly the safety precautions outlined in this document.

• In addition, basic rules and regulations for accident prevention applicable to the operating site must

also be considered.

The "General Conditions of Sale and Delivery" of Texas Instruments Incorporated or a TI subsidiary apply.

Warranty and liability claims for defect products, injuries to persons and property damages are void if they

are the result of one or more of the following causes:

• Improper use of the transponders IC

• Unauthorized assembly, operation and maintenance of the transponders IC

• Operation of the transponder IC with defective and/or non-functioning safety and protective equipment

• Failure to observe the instructions given in this document during transport, storage, assembly,

operation, maintenance and setting up of the transponder IC

• Unauthorized changes to the transponder IC

• Insufficient monitoring of the transponder ICs' operation or environmental conditions

• Repairs

• Catastrophes caused by foreign bodies and acts of God.

CAUTION

Tag-it HF-I Standard Transponder ICs are 100% thoroughly tested. It is the

responsibility of TIs customer to evaluate their assembly process for

compatibility with the Tag-it HF-I Standard Transponder IC properties and to

ensure through appropriate process controls that determined machine and

material parameter are met on an ongoing basis. TI does not accept warranty

claims for material that has already undergone packaging or conversion

process.

Regulatory, Safety and Warranty Notices

30

SCBU047 (11-09-21-064) – October 2007

Submit Documentation Feedback