Electronic Components Datasheet Search
  English  ▼

X  

H8S2282F Datasheet(PDF) 113 Page - Renesas Technology Corp

Part # H8S2282F
Description  16-Bit Single-Chip Microcomputer H8S Family/H8S/2200 Series
PDF  615 Pages
Scroll/Zoom Zoom In 100%  Zoom Out
Manufacturer  RENESAS [Renesas Technology Corp]
Direct Link  http://www.renesas.com
Logo RENESAS - Renesas Technology Corp

H8S2282F Datasheet(HTML) 113 Page - Renesas Technology Corp

Back Button H8S2282F Datasheet HTML 109Page - Renesas Technology Corp H8S2282F Datasheet HTML 110Page - Renesas Technology Corp H8S2282F Datasheet HTML 111Page - Renesas Technology Corp H8S2282F Datasheet HTML 112Page - Renesas Technology Corp H8S2282F Datasheet HTML 113Page - Renesas Technology Corp H8S2282F Datasheet HTML 114Page - Renesas Technology Corp H8S2282F Datasheet HTML 115Page - Renesas Technology Corp H8S2282F Datasheet HTML 116Page - Renesas Technology Corp H8S2282F Datasheet HTML 117Page - Renesas Technology Corp Next Button
Zoom Inzoom in Zoom Outzoom out
 113 / 615 page
background image
Section 5 Interrupt Controller
Rev. 3.00 Sep 26, 2006 page 81 of 580
REJ09B0148-0300
5.4
Interrupt Sources
5.4.1
External Interrupts
There are seven external interrupts: NMI and IRQ5 to IRQ0. These interrupts can be used to
restore this LSI from software standby mode.
NMI Interrupt
NMI is the highest-priority interrupt, and is always accepted by the CPU regardless of the interrupt
control mode or the status of the CPU interrupt mask bits. The NMIEG bit in SYSCR can be used
to select whether an interrupt is requested at a rising edge or a falling edge on the NMI pin.
IRQ5 to IRQ0 Interrupts
Interrupts IRQ5 to IRQ0 are requested by an input signal at pins
IRQ5 to IRQ0 Interrupts IRQ5 to
IRQ0 have the following features:
• Using ISCR, it is possible to select whether an interrupt is generated by a low level, falling
edge, rising edge, or both edges, at pins
IRQ5 to IRQ0.
• Enabling or disabling of interrupt requests IRQ5 to IRQ0 can be selected with IER.
• The interrupt priority level can be set with IPR.
• The status of interrupt requests IRQ5 to IRQ0 is indicated in ISR. ISR flags can be cleared to 0
by software.
The detection of IRQ5 to IRQ0 interrupts does not depend on whether the relevant pin has been
set for input or output. However, when a pin is used as an external interrupt input pin, do not clear
the corresponding DDR to 0; and use the pin as an I/O pin for another function.
A block diagram of interrupts IRQ5 to IRQ0 is shown in figure 5.2.



Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100  ...More


Datasheet Download

Go To PDF Page


Link URL



Does ALLDATASHEET help your business so far?  [ DONATE ] 

About Alldatasheet   |   Advertisement   |   Contact us   |   Privacy Policy   |   Link to Datasheet    |   Link Exchange   |   Manufacturer List
All Rights Reserved©Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com