SH7052 datasheet(680/919 Pages) RENESAS

680 / 919 page

654

• Bit 11—Reserved: This bit always reads 0. The write value should always be 0.

• Bit 10—PJ5 Mode Bit (PJ5MD): Selects the function of pin PJ5/TIO2F.

Bit 10: PJ5MD

Description

General input/output (PJ5)

(Initial value)

ATU input capture input/output compare output (TIO2F)

• Bit 9—Reserved: This bit always reads 0. The write value should always be 0.

• Bit 8—PJ4 Mode Bit (PJ4MD): Selects the function of pin PJ4/TIO2E.

Bit 8: PJ4MD

Description

General input/output (PJ4)

(Initial value)

ATU input capture input/output compare output (TIO2E)

• Bit 7—Reserved: This bit always reads 0. The write value should always be 0.

• Bit 6—PJ3 Mode Bit (PJ3MD): Selects the function of pin PJ3/TIO2D.

Bit 6: PJ3MD

Description

General input/output (PJ3)

(Initial value)

ATU input capture input/output compare output (TIO2D)

• Bit 5—Reserved: This bit always reads 0. The write value should always be 0.

• Bit 4—PJ2 Mode Bit (PJ2MD): Selects the function of pin PJ2/TIO2C.

Bit 4: PJ2MD

Description

General input/output (PJ2)

(Initial value)

ATU input capture input/output compare output (TIO2C)

• Bit 3—Reserved: This bit always reads 0. The write value should always be 0.

• Bit 2—PJ1 Mode Bit (PJ1MD): Selects the function of pin PJ1/TIO2B.

Bit 2: PJ1MD

Description

General input/output (PJ1)

(Initial value)

ATU input capture input/output compare output (TIO2B)

SH7052 Datasheet(PDF) 680 Page - Renesas Technology Corp